hs 70 spec sheet

16” Wide Hand Sink with Single Hole Electronic Sensor Faucet
Hand Sinks
HS-70
Model:
Project:
Item #:
Qty:
Date:
Approved By:
Due to our commitment to continued product improvement, specications are subject to change without notice.
Rev. 05/2021 • No. HS-70
Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470 • P: [phone] • [e-mail] • krowne.com
 16” Wide Hand Sink package includes: Single Hole Battery Operated
Electronic Sensor Faucet, 1-1/2” Drain, Wall Bracket, and Side Splashes
Sink:
 NSF-2
Faucet:
 ASME A112.18.1-2011/CSA B125.1-11
 NSF-61
 NSF/ANSI 372
 Meets ANSI A117.1 (ADA)
 CEC Listed
 Massachusetts Approved
H
C
D
15
3
4
"
15
1
4
"
7
7
8
"
13
3
8
"
12
1
2
"
9
3
4
"
5
5
8
"
7
3
4
"
9
3
4
"
2
1
4
"
HS-70
FAUCET SPECIFICATIONS
Model 16-675
Water Inlet 3/8” Male NPS
Temp. Range 40°F - 180°F
Water Pressure 20 -120 PSI
Sensor Type Infrared
Flow Rate 2.2 GPM
Default Time Out 30 seconds
Default GPC 1.10
Default Shut-Off Delay 1 Second
Default Auto Flush Off
Sensor Range 3/4” - 8-1/4”
Power Source (4) AA Batteries Included
Battery Life 500,000 cycles
Material Solid Brass
Finish Brushed Nickel
HAND SINK SPECIFICATIONS
Material 304 Stainless Steel
Gauge 20 Gauge
Sink Dimensions 15-3/4”W x 15-1/4”L x 13-3/8”H
Bowl Dimensions 12-1/2”W x 9-3/4”L x 5-5/8” Deep
Faucet 16-675 Electronic Sensor Faucet
Drain 1-1/2”
Mount Wall Mount Bracket
Weight 16 lbs.
DESCRIPTION
PRODUCT COMPLIANCE
WARNING: Plumbing connections should be made by qualified personnel who will observe all applicable plumbing, sanitary and safety codes.
California Proposition 65 Warning
Electronic Faucet includes Control Module, Mechanical
Mixing Valve, and supply hoses.
16-199
Optional
Included
AC Adapter