5 12 royal series three compartment bar sinks

Royal Series Three Compartment Bar Sinks
Royal Series Underbar
Due to our commitment to continued product improvement, specications are subject to change without notice.
Rev. 02/2021 • 5.12
Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470 • P: [phone] • [e-mail] • krowne.com
Model:
Project:
Item #:
Qty:
Date:
Approved By:
WARNING: Plumbing connections should be made by qualied personnel
who will observe all applicable plumbing, sanitary and safety codes.
Standard Features
 Royal Series wall mount faucet & drains w/ overflows included
 KR19 includes a wall mount faucet
 KR24 includes deck mount faucet
 1-1/2” left rear corner drains (Model 23-122)
Specifications
Sink Bowl
 20 gauge stainless steel 10” x 14” x 10” deep
 Furnished with 1-1/2” IPS rear corner drain and
7-1/2” overflow pipe
Drainboard
 20 gauge stainless steel reinforced with welded
braces every 6”
Front Apron
 20 gauge stainless steel clad over 20 gauge
galvanized steel
Sides  20 gauge stainless steel
Backsplash  20 gauge stainless steel
Back & Bottom  20 gauge galvanized steel
Legs
 1-5/8” tubular 16 gauge stainless steel with grey
plastic bullet foot
Plumbing
 Hot/Cold Water: 1/2” IPS
 Drain: 1-1/2” IPS
Faucet
 4” OC wall or deck mount faucet and ceramic
cartridge valves
NOTE: Letter at end of Model Number represents Bowl Location
KR19-43L
B
36"
B
A
19"
B
36"
B
A
24"
A
10"
10"
C
A
10"
10"
C
36
1
2
"
30"
14"
19"
6
7
16
"
24"
14"
36
1
2
"
30"
11
7
16
"
1/4" = 1'-0"
Royal
Silver
10.13.2020
Krowne Metal Corporation
100 Haul Road
Wayne, NJ 07470
krowne.com [phone]
Dealer Approved By Series Revisions Project
Backsplash Die Wall Height
6-1/2"H
4"H
Desc.
Date
Date: Job #:
PO28419-230
Approval Date:
Scale: Page:
1 of 1
Mounting
Legs
Die Wall
41" Tall
39-1/2" Tall
CLIENT NAME
PROJECT NAME
B
36"
B
A
19"
B
36"
B
A
24"
A
10"
10"
C
A
10"
10"
C
36
1
2
"
30"
14"
19"
6
7
16
"
24"
14"
36
1
2
"
30"
11
7
16
"
1/4" = 1'-0"
Royal
Silver
10.13.2020
Krowne Metal Corporation
100 Haul Road
Wayne, NJ 07470
krowne.com [phone]
Dealer Approved By Series Revisions Project
Backsplash Die Wall Height
6-1/2"H
4"H
Desc.
Date
Date: Job #:
PO28419-230
Approval Date:
Scale: Page:
1 of 1
Mounting
Legs
Die Wall
41" Tall
39-1/2" Tall
CLIENT NAME
PROJECT NAME
Model
Depth
(Front to
Back)
Length
Drainboard
Size
Left Side
to Drain
Bowls
Bowl
Location
Wgt.
(lbs.)
KR24-33C 24” 36” - 4” 3 Center 60
KR24-43L 24” 48” 12” 4” 3 Left 65
KR24-43R 24” 48” 12” 15” 3 Right 65
KR24-53C 24” 60” (2) 12” 15” 3 Center 76
KR24-63C 24” 72” (2) 18” 21” 3 Center 83
KR24-73C 24” 84” (2) 24” 27” 3 Center 93
A B C
Model
Depth
(Front to
Back)
Length
Drainboard
Size
Left Side
to Drain
Bowls
Bowl
Location
Wgt.
(lbs.)
KR19-33C 19” 36” - 4” 3 Center 55
KR19-43L 19” 48” 12” 4” 3 Left 60
KR19-43R 19” 48” 12” 15” 3 Right 60
KR19-53C 19” 60” (2) 12” 15” 3 Center 69
KR19-63C 19” 72” (2) 18” 21” 3 Center 75
KR19-73C 19” 84” (2) 24” 27” 3 Center 86
KR19-83C 19” 96” (2) 30” 33” 3 Center 94
A B C