5 7 combination ice bin 001

Due to our commitment to continued product improvement, specications are subject to change without notice.
Rev. 8/2020 • No. 5.7
Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470 • P: [phone] • [e-mail] • krowne.com
Model:
Project:
Item #:
Qty:
Date:
Approved By:
Combination Ice Bin
Royal Series Underbar
A
12" B
19"
16
1
8
"
36"
36
1
2
"
30"
11
1
2
"
10"
18
1
2
"
12"
C
Krowne Metal Corp
100 Haul Road
Wayne, NJ 07470
800-631-0442
www.krowne.com
5.2
DEALER:
ROYAL SERIES
1800 2100
STANDARD SERIES
1800 2100
FOODSERVICE DEALER
SCALE: 3/8" = 1'-0"
APPROVAL:
DATE: 03.27.2018 JOB #:
1 0F 1
PROJECT:
Top View
Front View
Standard Features & Specifications
Options & Accessories
Materials
 Interior: 20 gauge stainless steel. 12” deep ice bin section.
10” deep bottle section, wire racks included
 Front Apron: 20 gauge stainless steel clad over 20 gauge
galvanized steel
 Sides: 20 gauge stainless steel
 Backsplash: 20 gauge stainless steel
 Back & Bottom: 20 gauge galvanized steel
Drains &
Plumbing
 1” NPS Drain, Elixir section
 1” IPS Drain, Ice bin
 1/2” IPS Drain, Ice bin with Cold Plate. 4” PVC tailpiece
provided. PVC tailpiece required to avoid condensation through
metal to metal contact.
Cold Plate
 Cast aluminum post mix plate with 10 circuits. Plate is sealed
into bottom. Each circuit is 5/16” OD stainless steel tubing.
Two full with remainder to be half circuits. Bump and swedge
fittings on ends.
Tubing
Access
(Cold Plate)
 3/4” x 3-1/2” cutout in left side of backsplash
Insulation
 Foamed-in-place polyurethane
Backsplash  6-1/2”H x 1-1/2”D
Legs  1-5/8” tubular legs w/ grey plastic bullet foot
KR-101 Condiment Tray
KR-103 12” deep Stainless Steel Divider
KR-113 15” deep Stainless Steel Divider
KR-303 Left and Right End Side Splashes
KR-310 Right End Side Splash
KR-311 Left End Side Splash
KR-401 Cap Catcher and Opener
KR-406 Faucet Installed Over Ice Bin
KR-421 2 Metal Wire Bottle Racks
KR-501 Towel Ring
KR-502 15” Deep Liner on Ice Station
SC”XX”H
Partial Sliding Cover Ice Bin
(“XX” denotes size of Ice Bin)
SC”XX”F
Full Sliding Cover for Ice Bin
(“XX” denotes size of Ice Bin)
 12” deep ice bin with 1” drain, 1/2” drain with cold plate
 Insulated bottle section with wire bottle racks (KR-421) and 1” drain
 Soda line access cutout in rear on cold plate units
 Optional 15” deep liner that holds 25% more ice (KR-502)
 Optional built-in speed rail
 10 circuit cold plate available
Model
Overall
Length
Overall
Depth
Ice Bin
Length
Ice Bin
Location
Ice Bin
Capacity
(lbs.)
Left Side
to Ice
Bin Drain
Bottles
Stored
Cold
Plate
Circuits
Weight
(lbs.)
KR19-M36R 36” 19” 24” Right 74 24” 6 N/A 95
KR19-M36L 36” 19” 24” Left 74 12” 6 N/A 95
KR19-M36R-10 36” 19” 24” Right 74 24” 6 10 172
KR19-M36L-10 36” 19” 24” Left 74 12” 6 10 172
KR19-M42R 42” 19” 30” Right 92 27” 6 N/A 108
KR19-M42L 42” 19” 30” Left 92 15” 6 N/A 108
KR19-M42R-10 42” 19” 30” Right 92 27” 6 10 185
KR19-M42L-10 42” 19” 30” Left 92 15” 6 10 185
KR19-M48C 48” 19” 24” Center 74 24” 12 N/A 116
KR19-M48R 48” 19” 36” Right 110 30” 6 N/A 116
KR19-M48L 48” 19” 36” Left 110 18” 6 N/A 116
KR19-M48C-10 48” 19” 24” Center 74 24” 12 10 193
KR19-M48R-10 48” 19” 36” Right 110 30” 6 10 193
KR19-M48L-10 48” 19” 36” Left 110 18” 6 10 193
A
A
B
C
B C
KR19-M36L-10