Specification

KRUD KUTTER® Adhesive Remover
6/08/11
2/6
3 COMPOSITION / INFORMATION ON INGREDIENTS
Active Ingredients CAS-No. Weight %
sodium metasilicate pentahydrate 6834-92-0 < 3
alcohol ethoxylate proprietary < 3
Components not listed are not hazardous or are below reportable limits
4 FIRST AID MEASURES
Inhalation: If symptomatic, move to fresh air. Get medical attention if symptoms persist.
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If
easy to do, remove contact lenses, if worn. Get medical attention.
Skin Contact: Wash with soap and water. Get medical attention if symptoms occur.
Ingestion: If swallowed, DO NOT induce vomiting, unless directed by medical personnel. Get medical
attention.
5 FIRE-FIGHTING MEASURES
Extinguishing Media: Water spray, dry chemical, carbon dioxide and alcohol foam
Unsuitable Extinguishing Media: Not applicable
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.
Unusual Fire & Explosion Hazards: None known
Hazardous Combustion Products:
Carbon oxides
6 ACCIDENTAL RELEASE MEASURES
Personal Precautions: Wear appropriate personal protective equipment. See Section 8.
Spill Cleanup Methods: Small Liquid Spills: Wipe up or use a non-combustible material like
vermiculite, sand or earth to soak up the product and place into a container for later disposal.
Large Spillages: Absorb or cover with dry earth, sand or other non-combustible material and transfer to
containers. Use water spray to reduce vapors or divert vapor cloud drift. Prevent entry into waterways,
sewer, basements or confined areas.
7 HANDLING AND STORAGE
Handling: No special precautionary health measures should be needed under anticipated conditions of
use. Wash thoroughly after handling.
Prevention of Fire and Explosion: None