MSDS

KRUD KUTTER® GRAFFITI
REMOVER
6/12/
2/7
OSHA Regulatory Status: Hazardous; Consumer Product Use: Exempt
3 COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous component CAS-No. Weight %
benzyl alcohol 100-51-6 < 25
ethylene glycol monobutyl ether 111-76-2 < 15
Components not listed are not hazardous or are below reportable limits
4 FIRST AID MEASURES
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is
difficult, give oxygen. Get medical attention.
Eye Contact:
Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove
contact lenses. Get medical attention.
Skin Contact:
In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean
contaminated shoes before reuse.
Ingestion: If swallowed, DO NOT induce vomiting, unless directed by medical personnel. Get medical
attention. If victim is fully conscious, give a cupful of water. Never give anything by mouth to an
unconscious person.
5 FIRE-FIGHTING MEASURES
Extinguishing Media: Water spray, dry chemical, carbon dioxide and alcohol foam
Unsuitable Extinguishing Media: Not applicable
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.
Unusual Fire & Explosion Hazards: None known
Hazardous Combustion Products:
Carbon oxides
6 ACCIDENTAL RELEASE MEASURES
Personal Precautions: Wear appropriate personal protective equipment. See Section 8.
Spill Cleanup Methods: Small Liquid Spills: Use a non-combustible material like vermiculite, sand or
earth to soak up the product and place into a container for later disposal.
Large Spillages: Absorb or cover with dry earth, sand or other non-combustible material and transfer to
containers. Use water spray to reduce vapors or divert vapor cloud drift. Prevent entry into waterways,
sewer, basements or confined areas.