1 ON/OFF SENSOR ON/OFF TOUCH SENSOR The Touch Sensor is conveniently located on the mirror and will illuminate when the mirror is connected to power. TO TURN ON THE LIGHT Press the Touch Sensor once. The mirror light will turn on and the Touch Sensor will turn blue. TO DIM THE LIGHT When the light is on, press and hold the Touch Sensor until the mirror light reaches your preferred brightness, then release. TO TURN OFF THE LIGHT Press the Touch Sensor again.
2 USING OUTSIDE WALL SWITCH DEDICATED WALL SWITCH Please do not use any other fixtures on the line used for the mirror. OUTSIDE DIMMER You cannot use an outside dimmer with the mirror. MEMORY FEATURES The mirror light remembers the last setting selected: • If it is on when you turn off the wall switch, it will turn on when you turn the wall switch back on and the dimmer will be set to the last brightness level.
3 DEFOGGER DEFOGGER FEATURE The defogger slightly warms the mirror to prevent it from fogging up. WALL SWITCH CONTROL If the mirror is connected to a wall switch, you can use the wall switch to turn the defogger on and off. To use the defogger without the mirror light, simply use the Touch Sensor to turn the light off. DEFOGGER FUNCTION When the mirror is not connected to a wall switch, the defogger is designed for continuous use (with negligible energy consumption).
Tel: 347.794.9654 Fax: 800.672.1914 Info@KruggUSA.com www.KruggUSA.