DE EN ENGLISH EL IT PT ES NL SERIE EA83xx FR ESPRESSERIA AUTOMATIC PREMIUM NO SV The length of the guarantee depends on the legislation in your country with a maximum of 3000 cycles a year. This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
KRUPS SERIE EA83xx 1 2 3 4 5 6 7 8 9 CONTENTS DESCRIPTION 1 2 2 2 3 1.1 Information on espresso coffee 1.2 Automatic espresso machines energy saver mode 1.3 Safety instructions 1.4 Limits to use BEFORE FIRST USE 2.1 Measuring water hardness 2.2 Claris - Aqua Filter System cartridge 2.3 Putting the filter in place 4 4 4 5 PREPARING THE MACHINE 3.1 First use / Machine settings 3.2 First use / setting installing the filter 3.3 Rinsing the circuits 3.
EN DESCRIPTION DE Water tank lid Coffee bean container lid Water tank handle Coffee bean container Servicing flap with cup rest Water tank FR 1 ENGLISH NL Display screen Steam nozzle Coffee outlets with height adjusting handles Water level float IT Removable drip grid and tray PT Coffee grounds collector ES Select/OK button Cleaning tray Grinding fineness setting button EL Metal grinding wheel Cleaning tablet pipe View from above “On/Off” key Hot water key Setting key Steam butt
KRUPS SERIE EA83xx 1.1 Information on espresso coffee Dear Customer, Thank you for having purchased this Krups Automatic. We are sure you will enjoy both the quality of the coffee it makes and how easy it is to use.
• Never place the appliance on a hot surface such as a hot-plate or use it close to a naked flame. • Switch off and unplug the appliance immediately if you notice any problem while coffee is being made. EN ENGLISH • Do not put your hand or the power supply cord on the hot parts of the appliance.
KRUPS SERIE EA83xx 2 BEFORE FIRST USE 2.1 Measuring water hardness n Before using the appliance for the first time or if you have noted a change in water hardness, it is advisable to adapt the appliance to the observed water hardness. To determine the water hardness, use the measuring stick delivered with the appliance or get in contact with your water board. The appliance will ask you for the hardness of your water on first use (see First use / Setting machine parameters section page 6).
! Caution! To prime the cartridge correctly, follow this procedure every time you fit a cartridge. n When using later or replacing the cartridge: Select the "FILTER" function using the Prog button : : Maintenance -OK - Filter - OK - Place or change -OK - and follow the instructions on the screen. FR Place a 0.6 L container underneath the steam nozzle. NL Installing the cartridge in the machine. On first use, screw the filter cartridge into the bottom of the water tank. DE 2.
KRUPS SERIE EA83xx 3.1 First use / setting machine parameters n Use the rotating button to select a function, increase or reduce values. n Confirm your choice using the OK key. Q - + Use the rotating button to choose a language (highlighted). Press the OK key to validate. P Press to turn your appliance on. Follow the instructions that appear on the “choice of language” screen. Select Confirm When you first use your appliance, it will ask you to set several parameters.
ENGLISH Rinsing out the steam circuit : Place a container under the steam nozzle. Press the key to rinse the steam circuit. The rinsing cycle will stop automatically after the volume of water displayed has flowed through. n Press at any time to display menus to perform rinsing and then select MAINTENANCE => OK => RINSING. Note: It is best to perform rinsing after the appliance has remained unused for several days. ! Caution! When rinsing process is in progress, hot water comes out through the nozzles.
KRUPS SERIE EA83xx 4.1 Preparing an espresso n The quantity of water for an espresso must be between 20 and 70 ml. Each time you plug your machine in, it will carry out an initialisation cycle. Press the button, wait for the end of pre-heating and perform a rinsing operation if you wish. - + ! Put a cup under the coffee outlets. Use the rotating You can lower or raise the coffee button to select your drink and outlets to suit the size of your cups. confirm by pressing the OK key.
EN PREPARING HOT WATER DE Make sure that the steam nozzle is securely fitted on its tip. While the screen displays the drink selection menu, press the “hot water” key . A message will invite you to place a container under the steam nozzle. Again press the “hot water” to produce hot water. key If the nozzle is blocked, clean it out with a fine needle. The maximum amount of hot water per cycle is limited to 300 ml.
KRUPS SERIE EA83xx To remove any remaining milk from the steam nozzle, place a container under the nozzle and press key. the “hot water” ! Let the steam escape for at least 10 seconds and then again press the “hot to stop the water” key process. You can remove the steam nozzle for thorough cleaning. Wash it using a brush with water and a little non-abrasive washing up liquid. Rinse and dry it. Before re-fitting, make certain that the air inlet holes are not clogged by milk residues.
ENGLISH 1- Remove, empty and clean the coffee grounds collector. 2- Remove the cleaning tray. Clean it under water and dry thoroughly before re-fitting. First put the cleaning tray back then the coffee grounds collector. DE h h h If the above message appears, remove, empty and clean the drip tray. EN 2 The drip tray is equipped with a float to indicate when it needs emptying.
KRUPS SERIE EA83xx ! Caution! Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage that may result from the use of tablets from other brands. You can obtain cleaning tablets from KRUPS Service Centres. Make certain to protect your work surface during cleaning cycles, especially if they are made of marble, stone or wood. 7.
FR n Always remove the power supply cord from the socket and let your appliance cool down before cleaning it. n Do not use utensils or cleaning products likely to scratch or corrode the appliance. n Wipe the body with a damp non-abrasive cloth. Wipe the display screen carefully with a soft and dry cloth. n For optimal hygiene, clean it regularly to prevent condensation from forming and falling into the cup. DE 7.
KRUPS SERIE EA83xx 8.2 Settings SETTINGS Language Display contrast You can select your chosen language from those offered. You can set screen contrast for comfort. Date You need to set the date, especially if you use an anti-scale cartridge. Time You can choose between 12 hour or 24 hour time display.
n When this mode is activated and the screen displays the drink selection menu, the appliance EN 8.4 Demonstration mode ENGLISH will scroll the various functions available at regular intervals, so you can access them. FR DE Use this sub-menu to disable or activate this function. MOVING THE APPLIANCE NL 9 ! Caution! If the unpacked appliance is dropped, it is advisable to take it back to an authorized service centre to avoid any risk of fire or electrical problems.
KRUPS SERIE EA83xx The coffee is too light or not strong Check that the coffee bean tank has coffee in it and that it is flowing enough. correctly. Avoid using oily, caramelised or flavoured coffee. Reduce the volume of coffee using the central knob. Turn the grinding fineness knob towards the left for a finer grind. Prepare in two cycles using the 2 cup function. The coffee flows too slowly. Turn the grinding fineness knob towards the right for a coarser grind (may depend on the type of coffee used).
DE FR PT After filling the water tank, the Check that the tank is fitted correctly onto the coffee warning message is still displayed. machine. Check that the float at the bottom of the tank moves freely. Rinse the tank and descale if necessary. NL The Auto-Cappuccino accessory Some parts of your appliance can sometimes be hot, take care does not suck the milk (accessory not to burn yourself; let the machine cool down before handling. sold separately).
KRUPS SERIE EA83xx 12 RECIPES Here are some recipes you can make using your KRUPS Automatic : • Cappuccino For a cappuccino, the ideal proportions are as follows: 1/3 hot milk, 1/3 coffee, 1/3 milk froth. • Caffe Latte To make coffee with milk, also often called Latte Macchiato, the proportions are as follows: 3/5 hot milk, 1/5 coffee, 1/5 milk froth • For these milk-based preparations, it is best to use cold skimmed milk straight from the refrigerator (ideally between 6 and 8° C).
