EN.................. P. 1 – 21 A B EN H ESPRESSO AUTOMATIC SERIE EA88 C 1 1 I 3 2 R D J E K W FR F M G L 1 2 8080015669 www.krups.com 8080015669 ES N O www.krups.
0 1 2 3 1 4 2 1 sec.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following: 1. Read all instructions prior to first use. 2. Do not touch hot surfaces. Use handles or knobs. 3.
16. The use of accessory attachments not recommended by KRUPS may result in fire, electric shock or injury to persons. 17. Do not use outdoors. 18. Do not place on or near a hot gas or electric burner, or in a heated oven. 19. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect the machine, turn the control to “off”, then remove plug from wall outlet. Do not yank cord, instead grasp plug and pull to disconnect. 20. Do not use the machine for other than intended use. 21.
Congratulations on purchasing your Espresso Automatic Series EA88. This appliance allows you to prepare a wide variety of drinks, including espresso, coffees, ristretto, or milk-based beverages, like cappuccino, whenever you want. It is designed to allow you to enjoy restaurant quality coffee at home, whatever the time of day or day of the week. You will appreciate both the quality of the coffee produced as well as the ease of use.
Here are some recommendations to make the most of your appliance and produce quality coffees: The quality of the water has a huge impact on the quality of the aromas. Limescale and chlorine can alter the taste of your coffee. We recommend that you use the Claris Aqua Filter System cartridge, or slightly mineralized water to preserve all the aromas of your coffee. To prepare ristretto, espresso and coffee recipes, we recommend that you use preheated tulip shaped porcelain cups.
IMPORTANT INFORMATION ON THE PRODUCT AND INSTRUCTIONS 6 Guide to symbols used in the manual....................................................................................6 Intended use...........................................................................................................................8 Factory control.......................................................................................................................
IMPORTANT INFORMATION ON THE PRODUCT AND INSTRUCTIONS This manual contains all the important information for setting up, using and maintaining your automatic coffee/espresso appliance. Always read the instructions carefully before using your appliance for the first time and keep them for future use: any use which does not conform to these instructions will absolve KRUPS from any liability.
Check that your power supply voltage corresponds to the one shown on the appliance (alternating current only). Any error in plugging in your appliance may cause irreversible damage and invalidate the warranty. The appliance should always be plugged into an outlet with an earth ground connection. Check that the outlet can be easily accessed so that the plug can be disconnected easily in the event of a malfunction or during a thunderstorm.
Use and maintenance In the event of a malfunction or poor working condition, check the appliance and try to resolve the problem (see p. 22: Problems and corrective measures) or get the appliance repaired at an approved KRUPS service center if the issue persists. Always refer to the instructions for descaling/cleaning the appliance. Always unplug the machine before starting any maintenance operation.
DESCRIPTION Water tank lid Water tank handle Water tank Coffee drawer Coffee grounds collector Height-adjustable coffee outlet Removable grid and drip tray Lid for the coffee bean tank Cup rest grid One Touch Cappuccino accessory Milk froth adjustment button Milk suction pipe Water level indicator 1 N O P 2 Q R S Coffee beans tank Coffee grind setting knob Opening for cleaning tablet Burr grinder Touch screen Touch screen Program button “On/off” button EN A B C D E F G H I J K L M Further information o
BEFORE FIRST USE: INSTALLING THE APPLIANCE Danger: The appliance should be plugged into a 110-120V AC outlet with a connection. Otherwise, you could be exposed to fatal injuries due to ground electric shock! Initial settings When using the appliance for the first time you are asked to perform certain steps. Follow the instructions that appear on the display. The purpose of the following section is to give you some visual guidance. Turn on the appliance by pressing the On/Off (S) button.
Class 0 Very soft Class 1 Soft Class 2 Moderately hard Class 3 Hard Class 4 Very hard ° dH < 3° > 4° > 7° > 14° > 21° °e < 3.75° > 5° > 8.75° > 17.5° > 26.25° °f < 5.4° > 7.2° > 12.6° > 25.2° > 37.8° Appliance Setting 0 1 2 3 4 EN Degree of Hardness Fill a glass with water and immerse the strip. Fig. 1 Read the water hardness after one minute. Fig. 2 Indicate the number of red zones when setting your appliance.
The grind setting is useful when you change coffee type or if you would like a stronger or weaker coffee. It is not recommended that you perform this setting every time. Preparing drinks: Espresso This chapter explains how this appliance operates using the examples of the “Espresso” and “Americano” functions. Preparing an espresso Press the “Espresso” button. If the appliance detects a lack of water when you request a recipe, it will ask you to fill the water tank. Place the cup(s) under the coffee outlet.
Preparing other drinks: CAPPUCCINO/LATTE –– Preparing your appliance: Connect the milk suction pipe on the left to the “One Touch Cappuccino” block. Place the other end in a container filled with milk Fig. 11. You can prepare one or two cups with your appliance at the same time. Position your cup or cups and set the button on the block to the desired position: cappuccino or latte Fig. 12. –– Settings and making drinks Press the “Cappuccino Latte” button (1 cup) or the “Cappuccino x 2” button (2 cups).
You can stop the preparation at any time by pressing “STOP”. Warning: pressing stop begins the stop cycle which may last up to 30 seconds. This phase is normal. Favorites menu The “Favorites” menu on your Espresso Automatic EA88 allows you to save your favorite recipes and customize them according to your taste. The screen will guide you intuitively through the whole of this process.
You can set the automatic power-on to a certain time. Auto-off You can choose the time after which your appliance will automatically switch off (time without use). Auto rinse You can choose whether or not to activate automatic rinsing of the coffee nozzle when the coffee maker is switched on. Recipe settings You can also return to the default settings of the recipes. EN Auto-on Maintenance All these options allow you to start the selected programs. You then have to follow the onscreen instructions.
The drip tray collects the used water and the coffee grounds collector collects the used coffee grounds. The coffee drawer allows you to remove any coffee grounds below the percolation chamber. If the message “Empty the two trays” is displayed, empty and clean the drip tray. 1. Remove, empty and clean the coffee grounds collector. Fig. 14. 2. Remove and empty the coffee drawer. Wait for at least 8 seconds, then first put the coffee drawer back in place and then the coffee grounds collector tray. Fig. 15.
Automatic descaling program for the steam circuit Caution: if your appliance is fitted with our Claris - Aqua Filter System cartridge, please remove this before descaling. The appliance will tell you when the descaling program is required. The frequency at which this program needs to be run depends on the quality of the water used and whether the Claris Aqua Filter System filter is used or not (the more limescale in the water, the more descaling is required).
PROBLEMS AND CORRECTIVE MEASURES If any of the problems in the table below persist, call KRUPS customer service. See contact list enclosed. MALFUNCTION CORRECTIVE MEASURES The appliance indicates a fault, the software is frozen or your appliance is malfunctioning. Switch off and unplug the appliance, remove the filter cartridge, wait for one minute and start the appliance again. The appliance does not come on after pressing the On/off button. Check the fuses and socket.
CORRECTIVE MEASURES There is water under the appliance. Before lifting off the tank, wait for 15 seconds after the coffee has run through so that the appliance finishes its cycle correctly. Check that the drip tray is correctly positioned on the appliance, it must always be in place, even when your appliance is not being used. Check that the drip tray is not full. The drip tray must not be removed during a cycle. The milk or water is not flowing correctly into the cup or cups.
DISPOSAL The symbol on the appliance or packaging indicates that this product can never be treated as household waste. It must therefore be sent to a waste collection centre for the recycling of electrical and electronic equipment. By taking your appliance to a proper collection center and disposing of your appliances correctly at the end of its life, you are helping preserve our natural resources and are preventing harmful consequences for the environment and public health.
Consumer Statutory Rights This international KRUPS guarantee does not affect the statutory rights a consumer may have or those rights that cannot be excluded or limited, nor rights against the retailer from which the consumer purchased the product. This guarantee gives a consumer specific legal rights, and the consumer may also have other legal rights which vary from State to State or Country to Country. The consumer may assert any such rights at his sole discretion.
