Use and Care Manual

DEFRNLITEN
39
ENGLISH
MAINTENANCE AND CLEANING
8.1 Regular maintenance
n Filling the water tank – see visuals p. 13
The tank is fitted with a sensor to detect the presence of the tank and the water level.
n To remove it, open the right door (14), slightly lift the water tank up and pull it out.
n Remove the lid to fill it with water (you can also leave the lid on if you are filling it through the hole
on the lid using a suitable recipient).
n To put the tank back in place: slide the tank right into its housing (until you feel some resistance).
n Emptying and cleaning the used coffee collector – see visuals p. 13
n Open the left door (15). Remove the used coffee collector (5). Empty and clean it before putting it
back in place.
n Emptying and cleaning the drip tray – see visuals p. 13
Your machine has two drip trays (6 and 7).
n The small drip tray collects drips from the coffee nozzles but can be removed for preparations with
tall glasses.
n The large drip tray collects used water and overflows from the small drip tray.
n The large drip tray is fitted with an overflow detection sensor.
n When it needs to be emptied, the request will be made on the screen.
n The cover of this tray is necessary to avoid excessive condensation and water spills.
8
n The machine prompts you to fill the tank with water although there is water in it: Caution: The
machine includes a mechanism that manages the water level required for the requested recipe. It is
therefore normal that the water level is not always the same in the tank when there is a request to fill it.
n The machine does not detect my tank: Please check whether the tank has been inserted fully (until
you feel resistance).
Caution: Only put water in the tank!
!
Caution: Do not wash it in the dishwasher.
!
Caution: The cover and the grid can fall when you empty the drip tray.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page39