www.krups.
a c d d1 e b f h3 h2 h h1 l1 l2 i l3 j l5 l4 l3 l g g1 g2 g3 k 2 1 3 2 2 1 1 8 01 01
4 5 6 7 8 9 10 11 12 6 13 5 01 01
USA IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following: •Read all instructions carefully. •Do not touch hot surfaces. Use handles or knobs. •To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or appliance in water or other liquid. •Close supervision is necessary when any appliance is used by or near children.
CAUTION •This appliance is for household use only. Any servicing other than routine cleaning and user maintenance should be performed by authorized KRUPS service personnel only (see Guarantee of Performance). •Do not immerse base in water. •To reduce the risk of fire or electric shock, do not remove the base of the machine. There are no user serviceable parts inside. Repairs should be performed by authorized KRUPS service personnel only. SPECIAL CORD SET INSTRUCTIONS Regarding your Cord Set: A.
Description a b c d d1 e f g g1 g2 g3 h h1 h2 h3 i j k l l1 l2 l3 l4 l5 Lid Removable swivelling water tank Function selector On /Off switch operating indicator light Temperature control indicator light Percolation head Filter holder filter for one cup (ground coffee) filter for two cups (ground coffee) filter for «ESE» measure Steam nozzle for heating liquids tip sliding part ring for screwing / unscrewing Grid Drip tray Measuring spoon Auto cappuccino accessory screwing ring steam tube dial flexible tube
Before first use • Clean the water heating system with one or two tanks of clean water, as follows: • Remove the lid, lift out the tank and fill it with water (1). • Replace the tank, positioning it firmly in such a way that the connecting valve situated beneath the tank opens, and replace the lid. • Plug in the appliance. • Set the switch (d) to «I». The indicator light (d1) will come on. • Place one of the filters in the filter holder without any coffee. Then fit the assembly onto the percolation head.
• Place the pod in the filter holder fitted with its «ESE» filter. In the case of a pod with a tongue, fold down the tongue towards the interior (5). • Put the filter holder in place (2). As soon as the appliance reaches the right temperature, the indicator light (e) comes on. • Then turn the function selector (c) to the position « ». • Once the recommended quantity of coffee has been reached, turn the function selector (c) to the position O.
• Once you have obtained the desired quantity of frothy milk, turn the selector (c) to the O setting. • After use, remove the flexible tube (l4) from the container and clean the auto cappuccino accessory (see section “Cleaning the Machine”). . HEATING WATER (FOR TEA, FOR EXAMPLE) OR THICK LIQUIDS (SOUP, FOR EXAMPLE) The steam function together with the steam nozzle (h) make it easy to heat water for a variety of instant foods and beverages. .
. The percolation head, the filter holder and the filters These must be cleaned after every use. Simply run a damp cloth over the percolation head and clean the other accessories with water and a small quantity of non-abrasive liquid cleanser. Rinse and dry. • If the percolation head becomes heavily encrusted, unscrew its grid using a coin, clean it and replace, tightening it firmly (10). .
- Then use the following method: • Unscrew the grid of the percolation head and clean it (10). • Dissolveg 2 tablespoons of descaler or one packet of accessory 054 in half a litre (16 oz) of lukewarm water and pour the mixture into the empty water tank. • Set the switch (d) to «I». The indicator light (d1) will come on. Once the appliance reaches the appropriate temperature, the temperature control indicator light (e) comes on. • Place a container under the percolation head.
Water does not flow properly. Water passes too quickly. The espresso has no head (crema on the coffee) Insufficient foam on milk. When using E.S.E, coffee leaks around 14 Grid of the percolation head is clogged. Put the grid to soak in the descaling solution. See the paragraph «Descaling». Appliance scaled. See the paragraph «Descaling». Ground coffee too coarse. Try a finer ground coffee. Insufficient quantity of ground coffee. Use the spoon supplied to measure out the coffee.
GUARANTEE OF PERFORMANCE This fine KRUPS product is manufactured according to a rigid code of quality standards, and, with minimum care, should give years of service. However, should the need arise for repairs or for replacement parts within or after the warranty period, please call our CONSUMER SERVICE DEPARTMENT: USA : Canada : (800) 526-5377 24-hours a day, 7 days a week (905) 669-0114 Monday-Friday 8:00 a.m - 4:30 p.m You will be provided with specific instruction on how to get your product repaired.
