User Manual
Table Of Contents
- COVER
- MACHINE OVERVIEW
- PACKAGING CONTENT
- SAFETY
- HELP
- THANK YOU FOR CHOOSING NESPRESSO
- OPEN/CLOSE
- CONNECTIVITY (VERTUO NEXT / VERTUO POP)
- THE VERTUO SYSTEM
- FIRST STEPS
- COFFEE PREPARATION
- CLEANING
- DESCALING
- BLINKING SUMMARY
- TROUBLESHOOTING
- SPECIFICATIONS
- DISPOSAL AND ENVIRONMENTAL PROTECTION
- ENERGY SAVING MODE
- PERSONALIZE YOUR COFFEE SIZE
- RESET TO FACTORY SETTINGS
- EMPTYING THE SYSTEM
- BACKCOVER
FR
PANNES
DE
FEHLERBEHEBUNG
IT
RISOLUZIONE PROBLEMI
ES
RESOLUCIÓN DE PROBLEMAS
PT
RESOLUÇÃO DE PROBLEMAS
CS
ŘEŠENÍ PROBLÉMŮ
PL
ROZWIĄZYWANIE PROBLEMÓW
RU
NL
PROBLEMEN
OPLOSSEN
DA
FEJLFINDING
NO
FEILSØKING
SV
FELSÖKNING
FI
VIANMÄÄRITYS
CS
ŘEŠENÍ PROBLÉMŮ
SK
RIEŠENIE
PROBLÉMOV
HU
HIBAELHÁRÍTÁS
EL
ΑΝΤΙΜΕΤΠΙΣΗ
ΠΡΟΒΛΗΜΑΤΝ
RO
DEPANARE
AR
46
EN
11
TROUBLESHOOTING
VERTUO NEXT / VERTUO POP / VERTUO PLUS
1 No light on the buon. • The machine has turned OFF automatically; push the buon
or “UNLOCK” the machine.
• Check the mains, plug, voltage, and fuse.
2 No coee, no water. • Check that the water tank is filled.
• Check that a fresh capsule is inserted in correct position,
that the handle is properly locked and push the buon to
start.
• Descale if necessary.
• Open the machine head and let the capsule be ejected.
Then perform a cleaning as per cleaning section.
3 Coee is not hot enough. • Preheat cup with hot drinking water from the tap.
• Descale if necessary.
4 Leakage or unusual coee flow. • Check that the water tank is well positioned.
5 Machine turns to “OFF mode”. • To save energy the machine will turn o aer 2 minutes of
non-use.
• See paragraph on “Energy Saving Concept”.
6 Coee grounds in the cup. • Perform the cleaning procedure twice.
• See paragraph on “Cleaning”.
VERTUO NEXT / VERTUO POP
7 The machine doesn’t start and
has light steady on. If blinking,
see next points.
• Check that handle is properly locked.
• If you want to brew a Coee or Espresso, check that a fresh
capsule is inserted in correct position, that the handle is
properly locked and push the buon to start.
• If you are cleaning, descaling or emptying the system, check
that no capsule is inserted then close, lock the machine and
push the buon to start one of these operations.
8 The machine doesn’t start and
light blinks alternately; 1 blink
and 1 pause.
• Fill the water tank and push buon to start.
• Check that handle is properly locked.