SAFETY DATA SHEET 1613 Section 1. Identification Product name Product code Other means of identification : KRYLON® Interior/Exterior Paint Semi Flat Black : 1613 : Not available. Product type : Aerosol. Relevant identified uses of the substance or mixture and uses advised against Not applicable.
Section 2. Hazards identification Hazard statements : Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes serious eye irritation. Causes skin irritation. Suspected of damaging the unborn child. Suspected of causing cancer. May be fatal if swallowed and enters airways. May cause respiratory irritation. May cause drowsiness and dizziness. May cause damage to organs through prolonged or repeated exposure.
Section 3. Composition/information on ingredients Ingredient name % by weight CAS number Acetone Propane Methyl Ethyl Ketone Xylene Butane Ethylbenzene Methyl Isobutyl Ketone Carbon Black Toluene 42.2 15.0 11.1 8.2 7.0 1.5 1.1 1.0 0.
Section 4.
Section 5. Fire-fighting measures Special protective equipment for fire-fighters : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas.
Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Store in accordance with local regulations. Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Protect from sunlight. Store locked up. Eliminate all ignition sources. Use appropriate containment to avoid environmental contamination. Section 8.
Section 8. Exposure controls/personal protection STEL: 545 mg/m³ 15 minutes. OSHA PEL (United States, 2/2013). TWA: 100 ppm 8 hours. TWA: 435 mg/m³ 8 hours. ACGIH TLV (United States, 4/2014). TWA: 20 ppm 8 hours. STEL: 75 ppm 15 minutes. NIOSH REL (United States, 10/2013). TWA: 50 ppm 10 hours. TWA: 205 mg/m³ 10 hours. STEL: 75 ppm 15 minutes. STEL: 300 mg/m³ 15 minutes. OSHA PEL (United States, 2/2013). TWA: 100 ppm 8 hours. TWA: 410 mg/m³ 8 hours. NIOSH REL (United States, 10/2013). TWA: 3.
Section 8. Exposure controls/personal protection Hand protection Body protection Other skin protection Respiratory protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties.
Section 10. Stability and reactivity Reactivity : No specific test data related to reactivity available for this product or its ingredients. Chemical stability : The product is stable. Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur. Conditions to avoid : Avoid all possible sources of ignition (spark or flame). Incompatible materials : No specific data.
Section 11.
Section 11. Toxicological information Xylene Category 3 Not applicable. Respiratory tract irritation and Narcotic effects Respiratory tract irritation and Narcotic effects Respiratory tract irritation and Narcotic effects Respiratory tract irritation and Narcotic effects Respiratory tract irritation and Narcotic effects Butane Category 3 Not applicable. Ethylbenzene Category 3 Not applicable. Methyl Isobutyl Ketone Category 3 Not applicable. Toluene Category 3 Not applicable.
Inhalation Skin contact Ingestion : Adverse symptoms may include the following: respiratory tract irritation coughing nausea or vomiting headache drowsiness/fatigue dizziness/vertigo unconsciousness reduced fetal weight increase in fetal deaths skeletal malformations : Adverse symptoms may include the following: irritation redness reduced fetal weight increase in fetal deaths skeletal malformations : Adverse symptoms may include the following: nausea or vomiting reduced fetal weight increase in fetal dea
Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure Acetone Acute EC50 20.565 mg/l Marine water Acute LC50 6000000 µg/l Fresh water Acute LC50 10000 µg/l Fresh water Acute LC50 5600 ppm Fresh water Chronic NOEC 4.95 mg/l Marine water Chronic NOEC 0.016 ml/L Fresh water Chronic NOEC 0.
Section 12. Ecological information Mobility in soil Soil/water partition coefficient (KOC) : Not available. Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Section 15. Regulatory information U.S. Federal regulations State regulations : California Prop. 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Section 16. Other information Hazardous Material Information System (U.S.A.
Date of issue/Date of revision : 3/13/2015. Date of previous issue : No previous validation.