Installation Guide
Kryton, Krystol and KIM are trademarks of Kryton International Inc. ©2011 V. 2 011-0 8
Kryton International Inc.
3
1645 East Kent Avenue, Vancouver BC, Canada V5P 2S8 | tel 1.604.324.8280 | fax 1.604.324.8899 | toll free 1.800.267.8280 | web kryton.com
TECHNICAL DATA SHEET
Krystol Plug™
(Rapid-Setting Hydraulic Cement for Concrete Repair)
Product Code: K-620
DESCRIPTION
Krystol Plug is a fast setting powder that, when mixed to a stiff-dough consistency with water, may be used to immediately
arrest the seepage or ow of water through concrete voids. Krystol Plug is used to stop owing water, allowing waterproong
repair to be installed in leaking cracks, holes, joints or any place where water is penetrating a concrete structure.
FEATURES
• Stops owing water immediately
• Sets fast, in one to two minutes
• Easy to mix and apply
• Will set up and harden under water
• Has exceptional strength
• Does not contain any chlorides
• Safe for drinking water applications
KEY BENEFITS
• Can stop extreme leaks
• Works where all other products fail
RECOMMENDED USES
• Use as part of the Krystol
®
Crack Repair System to repair leaking cracks, joints and holes
• Provides impervious, non-shrinking seal to prevent seepage around pipes and metal xtures in masonry and concrete
PHYSICAL PROPERTIES
Appearance Dark gray powder
Bulk density g/cm
3
(lb. /cu. ft.) 1.4 (88)
pH (when mixed with water) 12
PLASTIC PROPERTIES
Working time (20°C/ 68°F, 50% RH) 1 minute
Hardening time (20°C/ 68°F, 50% RH) 2 minutes
Concrete Waterproong Details 1of 2
Kryton, Krystol and KIM are trademarks of Kryton International Inc. ©2011
1645 East Kent Avenue, Vancouver BC, Canada V5P 2S8 | tel 1.604.324.8280 | fax 1.604.324.8899 | toll free 1.800.267.8280 | web kryton.com