MSDS

ManualsBrandsKrystol Plug ManualsBuilding materials5-gal. Rapid Setting Concrete Repair Hydraulic Cement

1/6

MSDS – KRYSTOL PLUG | OCT 2013

KRYSTOL PLUG K-620

FAST-SETTING HYDRAULIC PLUG

MATERIAL SAFETY DATA SHEET

OCT 2013

1. PRODUCT AND COMPANY IDENTIFICATION

Product Identifier:

• Krystol Plug Fast-Setting Hydraulic Plug

Other Means of Identification:

• Krystol Plug

Product Code: K-620

Product Use: To immediately arrest the seepage or flow of water through concrete voids.

WHMIS Classification:

D2A, toxic; E, Corrosive (alkaline when moistened)

CAS Number: Not Established

Manufacturer’s Name: Kryton International Inc.

Address: 1645 E. Kent Avenue, Vancouver, BC, Canada, V5P 2S8

Telephone Number: 1-604-324-8280

FAX Number: 1-604-324-8899

Web Site: www.kryton.com

Emergency Contacts & Phone Number:

Kryton International Inc. 1.800.267.8280 (Business Hours)

Call a poison center or doctor/physician in your country

BC, Canada: BC Drug and Poison Information Centre 604.682.5050

Australia: Poisons Information Centre 13 11 26

US: American Association of Poison Control Centers 1.800.222.1222

Date MSDS Updated: Oct 1, 2013

MSDS Updated by: Research and Development Department, Kryton International Inc.

Date MSDS Prepared: May 29, 1995

MSDS Prepared by: Dept. Group #7, Contect Testing

2. COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS

Ingredient name

CAS #

EINECS

Content

(%)

ACGIH

TLV-TWA

(mg/m

)

OSHA PEL-8h

TWA

(mg dust/m

)

T: total, R: Respirable

European

Hazard

Classification

Portland Cement

65997-15-1

266-043-4

15-40

15 (T)

5 (R)

Not Available

C, T, Xi

Silica, Quartz

14808-60-7

238-878-4

15-40

(Respirable:

<0.003)

0.025

30/(%SiO

+2) (T)

10/(%SiO

+2) (R)

500mg/kg (oral, rat)

Not Available

C, T, Xi

Summary of content (6 pages)

PAGE 1
KRYSTOL PLUG K-620 FAST-SETTING HYDRAULIC PLUG MATERIAL SAFETY DATA SHEET OCT 2013 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier: • Krystol Plug Fast-Setting Hydraulic Plug Other Means of Identification: • Krystol Plug Product Code: K-620 Product Use: To immediately arrest the seepage or flow of water through concrete voids. WHMIS Classification: D2A, toxic; E, Corrosive (alkaline when moistened) CAS Number: Not Established Manufacturer’s Name: Kryton International Inc. Address: 1645 E.
PAGE 2
3. HAZARDS IDENTIFICATION Route of Entry: Skin Contact, Eye Contact, Inhalation and Ingestion Emergency Overview: • Grey, odorless and fine powder. It is not combustible or explosive. Short-term exposure to the dry powder presents little or no hazard. May irritate eyes, skin and respiratory tract. Exposure of sufficient duration to wet product or to dry product on moist areas of body, can cause caustic burn. • This product has not been identified as a risk of lung cancer.
PAGE 3
5. FIREFIGHTING MEASURES Flammability: Noncombustible Means of Extinction: Water, Fog, Alcohol-Resistant Foam, Dry Chemical or Carbon Dioxide (CO2) Flashpoint and Method: Non-combustible, >200F Autoignition Temperature: Not Applicable Fire and Explosion Data: Not Applicable Hazardous Combustion Products: Not Applicable Fire Fighting Instructions: Firefighters should wear self-contained breathing apparatus and full protective gear. Product reacts with water and creates heat. 6.
PAGE 4
8. EXPOSURE CONTROL/PERSONAL PROTECTION CONT’D Personal Protective Equipment: • Gloves: Chemical resistant rubber or nitrile gloves • Respirator: NIOSH approved with particulates filter or cartridge • Eye: Safety goggles or safety glasses with side shields • Footwear: Waterproof • Clothing: Long sleeve and long pants to avoid skin contact • Other: Wash thoroughly with soap and water after handling 9.
PAGE 5
11. TOXICOLOGICAL INFORMATION CONT’D Respiratory Sensitization: Can cause chemical burn when wet. Respirable crystalline silica can cause silicosis and serious lung disease. Numerical Measures of Toxicity: Not Available Carcinogenicity: No causal association between this product exposure and cancer has been established, but Silica, Quartz (CAS# 14808-60-7), one of the ingredients is listed as carcinogen by IARC and NTP. The respirable dust is lower than 0.003% in this product.
PAGE 6
15. REGULATORY INFORMATION This product is classified as non-Dangerous Goods. WHMIS Classification: D2A, toxic; E, Corrosive (when moistened) European Hazard Symbol: C, Corrosive (when moistened); T, Toxic; Xi, Irritant Globally Harmonized System (GHS) Classification: Acute Toxicity Category 4; Skin Corrosion/Irritation Category 1 (when moistened) HMIS: Health *2; Flammability 0; Physical Hazard 1. OSHA: This product is considered a hazardous chemical.