TDS

Kryton, Krystol and KIM are trademarks of Kryton International Inc. ©2011 V. 2 011-0 8
Kryton International Inc.
3
1645 East Kent Avenue, Vancouver BC, Canada V5P 2S8 | tel [phone] | fax [phone] | toll free 1.800.267.8280 | web kryton.com
TECHNICAL DATA SHEET
Krystol T1
®
& T2
®
Waterproong System
(Surface-Applied Cementitious Concrete Waterproong)
Product Code: K-210 (Krystol T1), K-220 (Krystol T2)
DESCRIPTION
Krystol T1 & T2 system is a surface-applied crystalline waterproong treatment for concrete structures that is used to protect
against the ingress of water. It is a dry powder, that when mixed with water becomes a coating that is applied to the inner or
outer sides of a concrete structure.
Krystol T1 and T2 contain Kryton’s unique and proven Krystol
®
technology which reacts with un-hydrated cement particles to
grow millions of needle-like crystals deep into the concrete mass. Over a period of weeks and months, these crystals grow,
lling the naturally occurring pores and voids in concrete, and permanently blocking the pathways for water and waterborne
contaminants. Later, if cracks form due to settling or shrinkage, incoming water triggers the crystallization process and
additional crystals begin to grow, lling cracks and ensuring that the structure’s waterproong barrier is maintained and
protected. The concrete itself becomes the waterproof layer and the surface treatment is not required to remain intact for the
system to be effective.
FEATURES
• Replaces unreliable exterior membranes, liners and coatings
• Reaches well below the surface and is not affected by surface wear or abrasion
• Self-seals hairline cracks up to 0.5 mm (0.02 in.)
• Reactivates in the presence of moisture
• Effective against hydrostatic pressure up to 140 m (460 ft.) of head pressure
• Waterproong increases with time
• Waterproofs from any direction (i.e. positive or negative side)
• Treatment may be applied to old or new concrete
• Safe for contact with potable water, certied by NSF to NSF/ANSI Standard 61 Drinking Water System Components –
Health Effects
KEY BENEFITS
• Permanently waterproofs the concrete
• Increases reliability and quality control
• Lowers the cost of waterproong
• Increased durability decreases building maintenance and repair costs
• Impervious to physical damage and deterioration
• Protects reinforcing steel against corrosion
• Superior performance enhancing your reputation for high quality work
Concrete Waterproong Surface-Applied 1of 4
Kryton, Krystol and KIM are trademarks of Kryton International Inc. ©2011
1645 East Kent Avenue, Vancouver BC, Canada V5P 2S8 | TEL [phone] | FAX [phone] | TOLL FREE 1.800.267.8280 | WEB kryton.com