TFT-LCD Monitor USER’S MANUAL TFT-LCD Monitor 74-520007-000
Precautions INDEX Read all of these instructions and save them for later use. Follow all warnings and instructions on the product. Product - Do not cover or block the vent holes in the case. - Precautions……………………………………………………… Federal Communication Commission Radio Frequency International Statement……………………………………….. 2 3 Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They may cause accident fire, electric shock or failure.
Product Description Environment - Place the monitor on a flat and leveled surface. - Place the monitor in a well-ventilated place. - Keep the monitor away from: overly hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment that generate strong magnetic fields. Congratulations on your purchasing this new generation of monitor. Your LCD monitor incorporates high quality display into a small light weighted module.
Taking a Look Rear interface Front View 1 2 3 4 5 1.Audio In This can be connected to the audio-out connector of the computer.(Optional) 2.Serial Port This can be connected the touch panel to the COM port of PC. (Optional) 3.Power Connector This is for connecting the power adapter. 4.Signal Connector This can be connected with the D-sub 15 pin signal connector. 5.USB Connector This can be connected the touch panel to the USB port of PC.(Optional) Computer connecting 1. Power switch 2.
option. z When the icon of you will adujust is highlighted, pressing AUTO key to make it to be selected, and then pressing UP/+ or DOWN/- to changes the value of the 2．“Volume”menu z Volume Adjust volume. z Mute Adjust volume to zero. selected OSD control option. After adjusting values, press MENU key to exit current OSD control option, the monitor will automatically save the changes. NOTE: The OSD screen will disappear if no input activities are detected for 10 seconds.
4．“Image Config”menu z Auto Config To adjust the geometrical parameters automatically for optimal disply status. z Clock To adjust the horizontal size of the image z Phase To decrease the horizontal interference. z Horizontal Adjust the horizontal position of the image. z Vertical Adjust the vertical position of the image. 6．“Language”menu. To choose OSD display language. There are 6 choices: English, Chinese, French, German, Italian, Spanish. Language 800x600 75.
Power LED Display & Power Saving Specificatiions General Power Saving Mode When the power switch are switch on, this LED lights in green. The LED indicates the different power status with altered LED colors when monitor operates in different modes (see following table). Mode Power LED Color Power Consumption H.V. Sync. On Green <40W +/+ Standby Red <5W －/ + Suspend Red <5W + /－ Off Off <5W －/－ We recommend to switch off the monitor when it is not use for quite a long time.
