User's Manual

momentarily and you'll reverse your transmit and receive frequencies.
Commercial Radio Setup
PLMR users in the United States are mandated to move to 12.5 kHz narrowband communication in the
150-174 MHz VHF and 421-512MHz UHF bands by January 1, 2013.
Follow these instructions to set your radio to Narrowband mode: This section is only true for VFO mode. WN is
settable on a per channel basis and has to be set prior to storing a channel. Once a channel has been
programmed, the channel must be deleted and reprogrammed to change the WN setting.
1. Press the [V/M] key to enter frequency mode.
2. Press the [MENU] key to enter the menu.
3. Enter [5] on the numerical keypad.
4. Press [MENU] to select.
5. Use the [UP] and [DOWN] keys to select between Wide and Narrow.
6. Press [MENU] to confirm and save
7. Press [EXIT] to exit the menu.
Amateur Radio Setup