User's Manual

Appendix C. - Menu definitions
Menu
№
Name
(Full name)
Setting Description
0
Squelch -Squelch
level
[0 - 9]
Setting the squelch to 0 will open up the squelch entirely.
- Squelch silences the receiver when there is no signal.
- Setting the squelch to 0 will open up the squelch entirely.
1
Step - Frequency
Step
2.5K[0] | 5K[1] | 6.25K[2] | 10.00K [3]|
12.50K[4]| 20.0K[5] | 25.0K[6] | 50.0K[7]
Selects the amount of frequency change in VFO/Frequency
mode when scanning or pressing the [up] or [DOWN] keys.
2
Tx Power -
Transmitting Power
High[0]| Low[1] | Middle[2]
Selects between High, Middle, and Low transmitter power
when in VFO/Frequency mode. Use the minimum transmitter
power necessary to carry out the desired communications.
3
Power save-Battery
Save
OFF[0]| ON[1]
Select to activate or deactivate battery saver. Activating this
feature will extend battery life, but you may miss the first few
syllables before RX opens.
- ON: open the function.
- OFF: close the function
4
Vox Level - Voice
Operated TX
OFF [0] | 1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 10[10]
When enabled it is not necessary to push the [PTT] key on the
transceiver. Adjust the gain level to an appropriate sensitivity
to allow smooth transmission.