User Manual

Table Of Contents
User Manual of Network Video Recorder
81
Figure 5. 32 HDD General- Editing
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter 12.3 Managing HDD
Group.
3. Set the HDD property to Read-only.
4. Click OK to save settings and back to the upper level menu.
l You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the
property to R/W.
l If there is only one HDD and is set to Read-only, the NVR can’t record any files. Only live view mode is
available.
l If you set the HDD to Read-only when the NVR is saving files in it, then the file will be saved in next
R/W HDD. If there is only one HDD, the recording will be stopped.