Quick Installation Guide

EZHD-TRF4/8/16 HD-TVI Real Time DVR Quick Installation Guide
14
4. Turn off the power switch on the rear panel when the note appears.
After the device starting up, the wizard will guide you through the basic settings, including edting password, date and time settings,
network settings, HDD initializing, and recording.
Live View
Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:
Live View Icons
In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the record and alarm in the
channel, so that you can find problems as soon as possible.
Indicating that there is an alarm or are alarms. Alarm includes video loss, tampering, motion detection or sensor alarm, etc.
Recording (manual record, continuous record, motion detection or alarm triggered record)
Alarm & Recording
Event/Exception (event and exception information, appears at the lower-left corner of the screen.)
Adding IP Cameras
The connection of KT&C PnP IP cameras is supported by the EZHD DVRs.
For all EZHD-TRF4/8/16 DVR models 2 network cameras can be added.
Steps:
1. Right-click the mouse in the live view mode to show the right-click menu.
2. Select Add IP Camera in the pop-up menu to enter the IP Camera Management interface.