Quick Installation Guide

EZHD-TRF4/8/16 HD-TVI Real Time DVR Quick Installation Guide
21
Local Recording (in the DVR) using the Web Interface
Two recording types can be configured: Manual and Scheduled. This section describes the configuration for scheduled recording.
Steps:
1. Click Configuration > Remote Configuration > Camera Settings > Schedule Settings to enter the Record Schedule settings
interface.
2. Select the camera to configure for the recording schedule.
3. Check the checkbox of Enable Record Schedule to enable recording schedule.
4. Click Edit to edit record schedule.
5. Choose the day in a week to configure scheduled recording.
1) Configure All Day or Customize Record:
 If you want to configure the all-day recording, please check the All Day checkbox.
 If you want to record in different time sections, check the Customize checkbox. Set the Start Time and End Time.
The times for each segment cannot be overlapped. Up to 8 segments can be configured.
2) Select a Record Type. The record type can be Continuous, Motion, Alarm, Motion & Alarm, and Motion | Alarm.
3) Check the checkbox of Select All and click Copy to copy settings of this day to the whole week. You can also check any of the
checkboxes before the date and click Copy.
4) Click OK to save the settings and exit the Edit Schedule interface.
6. Click Advanced to configure advanced record parameters.
7. Click Save to validate the above settings.