Quick Installation Guide

EZHD-TRF4/8/16 HD-TVI Real Time DVR Quick Installation Guide
3
Thank you for selecting this KT&C EZHD Series product. For additional information please refer to the complete User Guide for this DVR
series. End users should contact their KT&C Certified Dealer for service. Certified Dealers can obtain support directly from KT&C.
About This Guide
While KT&C makes every effort to insure the completeness and accuracy of the information contained in this Guide, we are not
responsible for typographical errors or misprints. At the same time, KT&C reserves the right to make changes to improve the performance
of our products at any time without notice, and so the specifications and content of this document are subject to change without notice.
Every effort will be made to include updates in new versions of this manual and/or online.
Trademarks and Registered Trademarks
 Windows and Windows mark are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
 HDMI, HDMI mark and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
 The products contained in this manual are authorized by HDMI Licensing LLC with the use right of the HDMI technology.
 VGA is the trademark of IBM.
 UPnP
TM
is a certification mark of the UPnP
TM
Implementers Corporation.
 Other names of companies and product contained in this manual may be trademarks or registered trademarks of their respective
owners.
DVR Pre-Installation
The EZHD series DVRs are highly advanced surveillance equipment that should be installed carefully. Please take into consideration the
following precautionary steps before installation of the DVR.
1. Keep all liquids away from the DVR.
2. Install the DVR in a well-ventilated and dust-free area.
3. Ensure environmental conditions meet factory specifications.
4. Install a manufacturer recommended HDD.
DVR Installation
During the installation of the DVR:
1. Use brackets for rack mounting (where applicable; otherwise, use a suitable rack shelf).
2. Ensure there is ample room for audio and video cables.
3. When installing cables, ensure that the bend radius of the cables are no less than five times than its diameter.
4. Connect both the alarm and RS-485 cable.
5. Allow at least 2cm (≈0.75-inch) of space between racks mounted devices.
6. Ensure the DVR is grounded.
7. Environmental temperature should be within the range of -10 ºC ~ 55 ºC, 14ºF ~ 131ºF.
8. Environmental humidity should be within the range of 10% ~ 90%.