User Manual

User Manual of Digital Video Recorder User Manual
127
9.1 Configuring General Settings
Purpose:
Network settings must be properly configured before you operate DVR over network.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
Figure 9. 1 Network Settings Interface
1. There is a self-adaptive 10M/100M network interface (EZHD-TVL4/8) and 10M/100M/100M on all other EZHD models.
Select the General tab.
2. In the General Settings interface, you can configure the following settings: IPv4 Address and subnet, IPv4 Gateway, MTU and DNS
Server. Be sure to set the DNS server address if there will be any WAN connection for remote viewing.
If the DHCP server is available, you can check the checkbox for DHCP to automatically obtain an IP address and other network
settings from that server.
The valid value of MTU is from 500 to 1500.
3. After having configured the general settings, click the Apply button to save the settings.