User Manual

User Manual of Digital Video Recorder User Manual

No.

Name

Description

PLAY Button

Same as the PLAY/AUTO button on front panel.

INFO Button

Same as the ZOOM+ button on front panel.

VOIP/MON Button

Same as the MAIN/SPOT/ZOOM- button on front panel.

MENU Button

Same as the MENU/WIPER button on front panel.

PREV Button

Same as the PREV/FOCUS- button on front panel.

DIRECTION/ENTER Buttons

Same as the DIRECTION/ENTER buttons on front panel.

PTZ Button

Same as the PTZ/IRIS- button on front panel.

ESC Button

Same as the ESC button on front panel.

RESERVED

Reserved for future usage.

F1 Button

Same as the F1/LIGHT button on front panel.

PTZ Control Buttons

Buttons to adjust the iris, focus and zoom of a PTZ camera.

F2 Button

Same as the F2/AUX button on front panel.

Troubleshooting the Remote Control:

Make sure you have installed batteries properly in the remote control. You must aim the remote control at the IR receiver in the front

panel.

If there is no response after you press any button on the remote, follow the procedure below to troubleshoot.

Steps:

1. Go into Menu > Settings > General > More Settings by operating the front control panel or the mouse.

2. Check and remember DVR ID number. The default ID number is 255. This ID number is valid for all IR remote controls.

3. Press the DEV button on the remote control.

4. Enter the DVR ID number from step 2.

5. Press the ENTER button on the remote.

If the Status indicator on the front panel turns blue, the remote control is operating properly. If the Status indicator does not turn blue and

there is still no response from the remote, please check the following:

1. Batteries are installed correctly and the polarities of the batteries are not reversed.

2. Batteries are fresh and not out of charge.

3. IR receiver is not obstructed.

If the remote still cannot function properly, please change the remote and try again, or contact your provider.