User Manual

User Manual of Digital Video Recorder User Manual
45
3.4 Adjusting Live View Settings
Purpose:
Live View settings can be customized to suit different needs. You can configure the output interface, dwell time for each screen to be
shown, mute or enable audio, choose the location for each camera, etc.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
Figure 3. 7 Live View-General
The settings available in this menu include:
• Video Output Interface: Designates the output for main monitor menus. Choices are HDMI/VGA and CVBS (for EZHD-TRF
models only).
• Live View Mode: Designates the display screen layout to be used during Live View.
• Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch in Live View.
• Enable Audio Output: Enables/disables audio output for the selected camera in the live view mode.
• Event Output: Designates the output to show event video; if available, you can select a different video output interface from the
Video Output Interface when an event occurs.
• Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen before reverting to original view.
2. Set the camera order.
1) Select View tab.
Figure 3. 8 Live View- Camera Order