User Manual

User Manual of Digital Video Recorder User Manual
53
Figure 4. 5 PTZ Settings
2. Select patrol No. in the drop-down list of patrol.
3. Click the Set button to add key points for the patrol.
Figure 4. 6 Key point Configuration
4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of patrol. The key point is
corresponding to the preset. The Key Point No. determines the order at which the PTZ will follow while cycling through the patrol.
The Duration refers to the time span to stay at the corresponding key point. The Speed defines the speed at which the PTZ will move
from one key point to the next.
5. Click the Add button to add the next key point to the patrol, or you can click the OK button to save the key point to the patrol.
You can delete all the key points by clicking the Clear button for the selected patrol, or click the Clear All button to delete all the
key pints for all patrols.
4.2.4 Calling Patrols
Purpose:
Calling a patrol makes the PTZ to move according the predefined patrol path.
Steps:
1. Click the button PTZ in the lower-right corner of the PTZ setting interface;
Or press the PTZ button on the front panel or click the PTZ Control icon in the quick setting bar, or select the PTZ option in the
right-click menu to show the PTZ control panel.
2. Click the button to show the general settings of the PTZ control.