User Manual

User Manual of Digital Video Recorder User Manual

5.1 Configuring Encoding Parameters

Before you start:

1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. (Menu>HDD>General)

Figure 5. 1 HDD- General

2. Click Advance to check the storage mode of the HDD.

1) If the HDD mode is Quota, please set the maximum record capacity. For detailed information, see Chapter 10.5 Configuring

Quota Mode.

2) If the HDD mode is Group, you should set up an HDD group. For detailed information, see Chapter 5.8 Configuring HDD Group

for Recording.

Figure 5. 2 HDD- Advanced

Steps:

1. Enter the Record settings interface to configure the encoding parameters:

Menu>Record>Encoding