User Manual

User Manual of Digital Video Recorder User Manual
73
5.7 Configuring Redundant Recording [EZHD-TRF]
Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W HDD but also in the redundant HDD, will
effectively enhance the data safety and reliability.
Before you start:
Multiple HDs are required. You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to
Redundant. For detailed information, please refer to Chapter 10.4 Managing HDD Group. There should be at least another HDD which is
in Read/Write status.
Steps:
1. Enter HDD Information interface.
Menu> HDD
Figure 5. 24 HDD General
2. Select the HDD and click to enter the Local HDD Settings interface.
1) Set the HDD property to Redundant.
Figure 5. 25 HDD General-Editing
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
3. Enter the Record setting interface.
Menu> Record> Encoding
1) Select the Record tab.