M160-HD(N)V122M-001 HD CCTV Digital Video Vandal Dome Camera O PE R AT ION MANUAL Thank you for choosing our high quality camera. Before attempting to connect operate this unit, please read and follow these instructions.
CA UTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
CONTENTS 1. CAUTIONS 2. IMPORTANT SAFETY INSTRUCTION 3. FEATURES 4. EQUIPMENT AND ACCESSORIES 5. CAMERA COMPONENT DESCRIPTIONS 6. INSTALLATION 7. DIMENSIONS 8. SPECIFICATION 9.
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
1. CAUTIONS Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2. IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
3. FEATURES • High Resolution. SONY 1 / 3” 2.1 M Progressive Color CMOS Image Sensor, 1080p(1920x1080)@30fps • Support Various Digital Video Output. 1080p@30fps, 1080p@25fps, 720p@60fps, 720p@50fps • Video Outputs. Primary HD-SDI (BNC) Test/Setup TV Out (Test Point-adapter to BNC included), NTSC/PAL selectable • OSD menu for setup and configuration. • Lens Control : DC Iris • 30 Long Life IR illuminations for 0 Lux viewing performance and range to 20m.
4.
5.
6. INSTALLATION Lens Zoom Knob Template Lens Focus Knob Plastic Anchors (3ea) Screws(3ea) NO TE When using the camera without LED take off the rubber. Cover Screws(3ea): are “captive and will normally be retained in cover. They are shown here for illustration purposes.
6.
7. DIMENSIONS Unit(mm) Ø112.8 71.5 123.
8. SPECIFICATION Image Device 2.1 Me g a P ix e l, 1 / 3 ” E x mo r CMO S Effective Pixels 1 9 8 4 (H) x 1 1 0 5 (V ) 3 0 f p s Unit cell size 2 . 8 u m (H) x 2 . 8 u m (V ) HD-S DI : 1 0 8 0 p @3 0 f p s , 1 0 8 0 p @2 5 f p s , 7 2 0 p @6 0 f p s , 7 2 0 p @5 0 f p s T V O u t : NT S C / P A L s e le c t a b le 0.1 Lux HD-S DI / 1 .
9.
9. OSD MANUAL Main IMAGE Sub Menu SHARPNESS GAMMA FLIP LENS SHADING DZOOM RESET DATA RETURN PRIVACY SPECIAL HLMASK PATTERN DISPLAY INFO. RESET DATA RETURN COMM. ADJUST SDI FORMAT SDI FPS CVBS FORMAT SYSTEM FAN ACTION (Option) APPLY SYSTEM INFO. REBOOT RETURN Sub Menu 0 ~ 20 0~4 OFF, H FLIP, V FLIP, HV FLIP OFF, ON 1x, 2x, 4x, 6x, 8x, 10x, 12x, 14x, 16x, 18x, 20x BACK / DEF. BACK / EXIT. ZONE NO. 0 ~ 23 ZONE OP.
9. OSD MANUAL • Function Description 0. SETUP - EXPOSURE - WHITE BALANCE - WDR/BLC - DNR - DAY & NIGHT - IMAGE - SPECIAL - SYSTEM - Reset Data All 1. EXPOSURE - BRIGHTNESS - AE MODE - LENS(IRIS) - SHUTTER • LEVEL - DSS - AGC - BASE FREQ : Go sub menu for camera exposure control. : Go sub menu for camera white balance control. : Go sub menu for camera WDR or BLC action. : Control noise reduction setting. : Go sub menu for camera day & night control. : Go sub menu for adjust image functions.
9. OSD MANUAL 3. WDR / BLC - MODE • WDR • BLC • D-WDR - WDR WGT - BLC OSD - BLC POS-X - BLC POS-Y - BLC SIZ-X - BLC SIZ-Y : Select WDR for BLC mode. : Act in wdie dynamic rage mode. Controled video frame rate in 1/2. : Act in Backlight compensation mode. : Digital wide dynamic range control. : WDR weight control level settig at WDR mode. : Display BLC control zone in screen. : Select BLC control zone vertical position. : Select BLC control zone horizontal position. : Select BLC control zone vertical size.
9. OSD MANUAL - HLMASK • LEVEL • COLOR - PATTERN - DISPLAY INFO. • CAMERA ID. 8. SYSTEM - COMM. ADJUST • CAMERA ID. • BAUDRATE • 485REG. - SDI FORMAT - SDI FPS - CVBS FORMAT • CVBS OUT ◦ ON, OFF ◦ AUTO • CVBS VIEW ◦ CROP ◦ FULL - FAN ACTION (* Option) • FAN ON LEV • FAN OFF MG - APPLY - SYSTEM INFO. • S/W VERSION • SET VERSION : Mask image high light area. : Select high light level. : Select mask color. : Color bar display Select. : Camera information OSD on/off. : Setting for RS485 communication.
