M130-HDB450-001 HD CCTV Digital Video Camera O PE R AT ION MANUAL T h a n k y o u f o r cho o si ng o u r hi gh q uality cam er a. Before attempting to connect or operate, please read and fo llo w t h e s e i n structi on s.
CA UTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
CONTENTS 1. CAUTIONS 2. IMPORTANT SAFETY INSTRUCTION 3. FEATURES 4. EQUIPMENT AND ACCESSORIES 5. INSTALLATION 6. DIMENSIONS 7. SPECIFICATION 8. OSD MENU STRUCTURE 9.
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
1. CAUTIONS Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2. IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
3. FEATURES • High Resolution 1/3” 2.1 Mega pixel PANASONIC Color CMOS.
4. EQUIPMENT AND ACCESSORIES C am er a Mo unti ng B r acket Sc r ew 3ea Op er ati on Ma nual Se r vi ce Vid eo O utpu t T est Cabl e CAUTIONS When you connect Service Video Output Cable WDR function does not work.
5.
5.
6. DIMENSIONS Unit(mm) MOUNTING HOLE (1/4"-20 UNC, Depth 4.5) 75 5 Ø4 MOUNTING HOLE (1/4"-20 UNC, Depth 4.5) 41.5 36 97 3-Ø3.
7. SPECIFICATION CMOS Pixel size 1/3" 2.1 Mega pixel PANASONIC Color CMOS 2.75um (H) x 2.75um (V) Effective Pixels 1944(H) x 1092(V) Manual Shutter 1/30(25), 1/60(50), 1/120(100), 1/250, 1/700, 1/1K, 1/1.6K, 1/2.5K, 1/5K, 1/7K, 1/10K, 1/30K Sense-up AGC White Balance x 2, x 3, x4 Off / 0dB ~ 23dB AUTO / Manual / PUSH LOCK Sensitivity S/N ratio 1.0 Lux More than 50dB Video Output HD-SDI / CVBS Day & Night OFF / ON(digital D&N) LENS Dimension Board Lens 45(ø) x 75(mm) Weight 145g ETC.
8.
8.
9. OSD FUNCTION DESCRIPTION • EXPOSURE EXPOSURE > BRIGHRNESS SHUTTER MODE SHUTTER SPEED DSS AGC MAX INITIAL RETURN ||||||||||||14 AUTO ––– OFF 23dB - BRIGHTNESS: Enable user to control the image brightness (0~20steps). - SHUTTER MODE: Enable user to set up the Shutter Mode. -> AUTO, MANUAL - SHUTTER SPEED: Enable user to set up the Shutter Speed. -> 1/30(25), 1/60(50), 1/120(100), 1/250, 1/700, 1/1K,1/1.6K, 1/2.5K, 1/5K, 1/7K, 1/10K, 1/30K. *() is for PAL TYPE.
9. OSD FUNCTION DESCRIPTION • WDR/BLC - MODE: Enable user to set WDR/BLC mode. -> OFF, WDR, BLC > MODE WDR WDR LEVEL 4 1. WDR(Wide Dynamic Range): BLC OSD ON Use the condition which Image doesn’t || |6 BLC X - POSITION || |4 BLC Y - POSITION figure out with BLC such as place | | |7 BLC X - SIZE surrounded windows and lobby. | | | BLC Y - SIZE 10 INITIAL (*The screen display may be unnatural) RETURN 2.BLC(Backlight compensation mode): This function works for subjects in the kind of backlight conditions.
9. OSD FUNCTION DESCRIPTION • IMAGE IMAGE > SHARPNESS MIRROR FLIP DZOOM SHADING HLMASK D-WDR DNR INITIAL RETURN 4 OFF OFF 1X OFF OFF OFF MIDDLE - SHARPNESS: Enable user to control the image sharpness (0~10steps). - MIRROR: Sets the horizontal flip for the display output. (OFF) (ON) - FLIP: Sets the Vertical flip for the displayoutput. (OFF) (ON) - DZOOM(Digital Zoom): Max. 20x Digital Zoom - SHADING: Enable user to set up the lens shading compensation mode.
9. OSD FUNCTION DESCRIPTION • SPECIAL : Setting up the CAM TITLE, LANGUAGE, PRIVACY, MOTION, DISPLAY, SYSTEM. SPECIAL > CAM TITLE LANGUAGE PRIVACY MOTION DISPLAY SYSTEM INITIAL RETURN [ ] ENGLISH OFF OFF [ ] [ ] - CAM TITLE : Enable user to choose any word in screen(Maximum 10 letter is available) CAM TITLE 0123456789ABCDEFGHIJKLMN OPQRSTUVWXYZ!?*#$%()<>{} SPACE>> <
9. OSD FUNCTION DESCRIPTION - PRIVACY : Privacy is the function that covers the some part on screen to prevent private life.(Maximum 30 point covered) PRIVACY > ZONE NO MASK MODE X-POSITION Y-POSITION X-SIZE Y-SIZE COLOR TRANSPARENCY INITIAL RETURN 0 ON 12 2 3 3 CYN 0% 1. ZONE NO : Enable user to set up a position from 0 to 29 area. 2. MASK MODE : Enable user to set up screen output of chosen position. 3. X-POSITION : Mask Horizontal start position. 4. Y-POSITION : Mask Vertical start position. 5.
9. OSD FUNCTION DESCRIPTION SYSTEM > SHADING DET DEFECT DET DOUT FORMAT DOUT FPS COLOR BAR CVBS COLOR INITIAL RETURN OFF OFF 1080P 30 OFF NTSC - SYSTEM 1. SHADING DET: Lens shading detection function. 2. DEFECT DET: White pixel detection and compensation function. 3. DOUT FORMAT: Enable user to set up digital output format(720p, 1080p). 4. DOUT FPS: Enable user to set up digital output frame rate. 5. COLOR BAR: Enable user to set up output colorbar. 6. CVBS: Enable user to set up CVBS type NTSC or PAL.