M159-HDV120F-001 HD CCTV Digital Video Panoramic View Camera O PE R AT ION MANUAL Thank you for choosing our high quality camera. Before attempting to connect operate this unit, please read and follow these instructions.
CONTENTS 1. CAUTIONS 2. IMPORTANT SAFETY INSTRUCTIONS 3. FEATURES 4. EQUIPMENT AND ACCESSORIES 5. CAMERA COMPONENT DESCRIPTIONS 6. INSTALLATION 7. DIMENSIONS 8. SPECIFICATIONS 9. OSD MANUAL • Menu Structure • Function Description CA UTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
1. CAUTIONS WEEE (Waste Electrical & Electronic Equipment) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
2. IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
3. FEATURES • High Resolution. SONY 1 / 3” Progressive Color CMOS Image Sensor. ( 3 Mega Pixel ). • Support Various Digital Video Output. 1080p30, 1080p25 • Video Outputs. Primary HD-SDI (BNC) Test/Setup TV Out (Test Point-adapter to BNC included), NTSC/PAL selectable • 360° Panorama HD-SDI Camera. - Four PTZ Views - Two 180° Panorama Views - One 360° Panorama View with PAN • OSD menu for setup and configuration. • Support RS485 Communucation Protocol for Camera Configuration Remote Control.
4.
5.
6. INSTALLATION Template Plastic Anchors(3ea) Screws(3ea) Cover Screws(3ea): are “captive and will normally be retained in cover. They are shown here for illustration purposes.
6. INSTALLATION • MONITOR CONNECTION HD SDI IN DC12V / AC24V REGULATED POWER SUPPLY RS485(+) RS485(-) When you install the camera, please glue up the end of cable to keep it stable in order to protect the camera from the humidity problems. Service Video Connector TEST CABLE VIDEO IN HANDHELD MONITOR OPEN COVER View of the most appropriate angle can be set. Using the 1-axis 360° rotation function.
7. DIMENSIONS Unit(mm) Ø112.8 71.5 123.
8. SPECIFICATIONS Image Device S ONY 1 / 3” P ro g re s s iv e Co lo r CMO S I ma g e S e n s o r ( 3 Me g a P ix e l , 1 5 f p s ) Effective Pixels 2 0 9 6 (H) x 1 5 6 1 (V ) Unit cell size(um) Video output mode Output Mode 2 . 5 u m (H) x 2 . 5 u m (V ) HD-S DI : 1 0 8 0 p 3 0 , 1 0 8 0 p 2 5 TV O u t : NT S C / P A L s e le c t a b le 3 6 0 ° P a n o ra ma V ie w / F o u r P T Z V ie ws T wo 1 8 0 ° P a n o ra ma V ie ws / On e 3 6 0 ° P a n o ra ma V ie w wit h P A N Minimum illumination 0.
9.
9.
9. OSD MANUAL • Function Description MAIN MENU MAIN MENU - PANORAMA MODE SELECT : Panorama Mode Select. - WHITE BALANCE : Basic CAMERA FUNCTION Setting. + PANORAMA MODE SELCET + CAMERA SETTING * EXIT PANORAMA MODE SELECT PANORAMA MODE + 180 PANORAMA + 360 PANORAMA + 1 REGION + 1: ORIGINAL / 3 : REGION + 4 PTZ * EXIT - 180 Panorama: Use the SET button to select Fisheye Corrected Mode With 180° Panorama. - 360° PANORAMA: Use the SET button to select Fisheye Corrected Image Mode.
9. OSD MANUAL PTZ & ZOOM MODE (Sub Menu) PTZ & ZOOM MODE * WINDOW SELECT: + FLIP + MIRROR + PAN & TILT CONTROL + POSITION INITIALIZE * ESC * EXIT - WINDOW SELECT: Use the LEFT/RIGHT button to select the PTZ Control Window. Control Available Window Mode 1 Region 4 Region 1 : ORG / 3 Region 180 Panorama 360 Panorama Window Number.
9. OSD MANUAL • Function Description CAMERA SETTING CAMERA SETTING + EXPOSURE + WHITE BAMANCE + DAY & NIGHT + IMAGE + SYSTEM + RESET DATA * ESC * EXIT - EXPOSURE: Adjust exposure control - WHITE BALANCE: Adjust white balance control - DAY & NIGHT: Day & Night control - IMAGE: Apply image processing effects - SYSTEM: System information & setting - RESET DATA: Reset camera’s all feature data to default value. - EXIT: Close OSD menu.
9.
9.
9. OSD MANUAL DAY & NIGHT DAY & NIGHT + DAY & NIGHT AUTO + DELAY TIME + DAY THRESHOLD + NIGHT THRESHOLD 3 SEC 101 188 * ESC * EXIT DAY & NIGHT + DAY & NIGHT * ESC * EXIT - DAY & NIGHT - DELAY TIME - DAY THRESHOLD - NIGHT THRESHOLD DAY & NIGHT COLOR + DAY & NIGHT BW * ESC * EXIT : Use the LEFT / RIGHT button to select Day & Night modes – AUTO, COLOR, BW AUTO Auto controlled by AGC level in the processor. COLOR Fixed Day State. Color Image. BW Fixed Night State. BW Image.
9. OSD MANUAL IMAGE IMAGE + GAMMA + SHARPNESS + CONTRAST + SATURATION + DNR 7 17 18 OFF * ESC * EXIT - GAMMA: Use the SET button to go to the GAMMA sub menu. - SHARPNESS: Use the LEFT/RIGHT button to adjust the sharpness value. - CONTRAST: Use the LEFT/RIGHT button to adjust the contrast value. - SATURATION: Use the LEFT/RIGHT button to adjust the saturation level. - DNR: Use the LEFT/RIGHT button to select the digital noise reduction level.
9. OSD MANUAL COMMUNICATION (Sub Manu) COMMUNICATION * CAMERA ID + BAUD RATE GROUP. 1 9.6K * COMM APPLY * ESC * EXIT - CAMERA ID : Use the LEFT/RIGHT button to select the RS485 ID Address Group.
9. OSD MANUAL EXIT SAVE & EXIT SETUP EXIT WITHOUT SAVING This menu can be accessed when use the EXIT action in all menu pages. : Save all current setting and Close OSD menu. These setting are loaded - SAVE & EXIT SETUP and applied automatically when the Camera is power on. Use the SET button to action. - EXIT WITHOUT SAVING : Close OSD menu. Camera’s current setting is not saved. Use the SET button to action.
