HD CCTV M141-HDX222-001 Digital Video Camera O PE R AT ION MANUAL Thank you for choosing our high quality camera. Before attempting to connect operate this unit, please read and follow these instructions.
CA UTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
CONTENTS 1. CAUTIONS 2. IMPORTANT SAFETY INSTRUCTIONS 3. FEATURES 4. EQUIPMENT AND ACCESSORIES 5. CAMERA COMPONENT DESCRIPTIONS 6. INSTALLATION 7. DIMENSIONS 8. SPECIFICATIONS 9.
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
1. CAUTIONS WEEE (Waste Electrical & Electronic Equipment) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
2. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
3. FEATURES • High Resolution SONY 1/3” 2.
4.
5.
5. CAMERA COMPONENT DESCRIPTIONS • BACK ➊ ➋ ➎ ➐ ➊ ➋ ➎ VIDEO MENU/SET OFF/ON ➐ VIDEO HD SDI OUTPUT ➍ MENU/SET OFF/ON HD SDI OUTPUT ➑➍ POWER ➌ + - VIDEO ➏ ➌ ➑ POWER VIDEO ➒➓ ➓ DC12V GND ➒ DC12V/AC24V DC12V AC24V / DC12V ①. MENU BUTTON ②. UP BUTTON ③. DOWN BUTTON ④. LEFT BUTTON ⑤. RIGHT BUTTON ⑥. POWER LED (The LED turns on when power is supplied) ⑦. VIDEO OFF/ON SWITCH ⑧. HD SDI OUTPUT JACK ⑨. VIDEO OUT JACK (Used to connect an external video monitor in jack) ⑩.
6. INSTALLATION • LENS CONNECTION Mega Pixel Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and C-Mount lens can be used (adapter included for C-Mount Lens). NOTE • Please keep the lens clean. • Any foreign objects and Finger marks on the lens can cause inferior image quality in low light level conditions. When using an auto iris lens 1. Please peel off about 8mm of the outer skin of the auto iris lens cable. 2.
6. INSTALLATION 3. Please remove the cover of the auto iris lens connection plug and solder the lens cable to the connector pin in the plug. * PIN ASSIGNMENT OF THE LENS CONNECTOR 1) Video auto iris lens Pin 1: Power source(DC 12V) Pin 3: Video signal Pin 4: Shield, GND(Ground) 2) DC auto iris lens Pin 1: DAMP-(CTL-) Pin 2: DAMP+(CLT+) Pin 3: DRV+ Pin 4: DRV-(GND) 4.
6. INSTALLATION 5. Please insert the connection plug from the auto iris lens cable into the auto lens connector, which is located on the side of the camera. * NOTE Use the lens under the specification as shown. Otherwise the lens can damage the camera or abnormal fixing may result.
6.
6.
7. DIMENSIONS TRIPOD MOUNTING HOLE (1/4"-20 UNC, Depth 5) 81.1(CS-MOUNT) 75.5(C-MOUNT) 70.5(CS-MOUNT) 58 58 86.
8. SPECIFICATION Image Device SONY 1/3” 2.1M/P Progressive Color CMOS Image Sensor Effective Pixels 1 9 8 4 (H) x 1 1 0 5 (V ) 3 0 f p s Unit cell size 2 . 8 u m (H) x 2 . 8 u m (V ) Video Output Mode HD-S DI: 7 2 0 p 6 0 , 7 2 0 p 5 0 , 1 0 8 0 p 3 0 , 1 0 8 0 p 2 5 T V O u t : NT S C / P A L s e le c t a b le Minimum Illumination 0.
9. OSD MANUAL • Menu structure Main EXPOSURE Sub Menu BRIGHTNESS AE MODE LENS(IRIS) SHUTTER DSS AGC BASE FREQ RESET DATA RETURN WB MODE WHITE BALANCE SATURATION RESET DATE RETURN MODE WDR WGT BLC OSD BLC POS-X WDR / BLC BLC POS-Y BLC SIZE-X BLC SIZE-Y RESET DATA RETURN DNR DAY & NIGHT Sub Menu 0 ~ 20 NORMAL AE / INDOOR MANUAL / AUTO 1/30(25), 1/60(50), 1/120(100), 1/240, 1/500, MANUAL / LEVEL 1/1K, 1/2K, 1/4K, 1/8K, 1/16K, 1/30K, 1/60K.
9. OSD MANUAL Main IMAGE Sub Menu SHARPNESS GAMMA FLIP LENS SHADING DZOOM RESET DATA RETURN PRIVACY SPECIAL HLMASK PATTERN RESET DATA RETURN SDI FORMAT SDI FPS CVBS FORMAT SYSTEM APPLY SYSTEM INFO. REBOOT RETURN Sub Menu 0 ~ 20 0~4 OFF, H FLIP, V FLIP, HV FLIP OFF, ON 1x, 2x, 4x, 6x, 8x, 10x, 12x, 14x, 16x, 18x, 20x BACK / DEF. BACK / EXIT. ZONE NO 0 ~ 23 ZONE OP OFF / ON X-POS 0 ~ 60 Y-POS 0 ~ 40 X-SIZ 0 ~ 40 OFF / ON Y-SIZ 0 ~ 40 COLOR BLK, WHT, YEL, CYN, GRN, MAG, RED, BLU TRANS.
9. OSD MANUAL • Function Description 0. SETUP - EXPOSURE - WHITE ALANCE - WDR/BLC - DNR - DAY & NIGHT - IMAGE - SPECIAL - SYSTEM - RESET DATA ALL : Go sub menu for camera exposure control. : Go sub menu for camera white balance control. : Go sub menu for camera WDR or BLC action. : Control noise reduction setting. : Go sub menu for camera day & night control. : Go sub menu for adjust image functions. : Go sub menu for special feature control. : Go sub menu for system control & information.
9. OSD MANUAL 3. WDR/BLC - MODE • WDR • BLC • D-WDR - WDR WGT - BLC OSD - BLC POS-X - BLC POS-Y - BLC SIZ-X - BLC SIZ-Y : Select WDR / BLC mode. : Act in wdie dynamic rage mode. Controled video frame rate in 1/2. : Act in Backlight compensation mode. : Digital wide dynamic range control. : WDR weight control level settig at WDR mode. : Display BLC control zone in screen. : Select BLC control zone vertical position. : Select BLC control zone horizontal position. : Select BLC control zone vertical size.
9. OSD MANUAL 7. SPECIAL - PRIVACY • ZONE NO. • ZONE OP. • X-POS • Y-POS • X-SIZ • Y-SIZ • COLOR • TRANS. - HLMASK • LEVEL • COLOR - PATTERN 8. SYSTEM - SDI FORMAT - SDI FPS - CVBS FORMAT • CVBS OUT ◦ ON, OFF ◦ AUTO • CVBS VIEW ◦ CROP ◦ FULL - APPLY - SYSTEM INFO. • S/W VERSION • SET VERSION : Setting for protect private area in image using mask setting. : Select private mask zone number. : Select zone mask display on/off. : Select zone horizontal position. : Select zone vertical position.
