M149-HDD122-001 HD CCTV Digital Video Dome Camera OPERATION MANUAL Thank you for choosing our high quality camera. Before attempting to connect operate this unit, please read and follow these instructions.
CA UTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
CONTENTS 1. CAUTIONS 2. IMPORTANT SAFETY INSTRUCTION 3. FEATURES 4. EQUIPMENT AND ACCESSORIES 5. CAMERA COMPONENT DESCRIPTIONS 6. INSTALLATION 7. DIMENSIONS 8. SPECIFICATION 9.
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
1. CAUTIONS Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2. IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
3. FEATURES • High Resolution SONY 1 / 3” 2.1 M Progressive Color CMOS Image Sensor, 1920x1080 30fps • Support various digital video output 720p60, 720p50, 1080p30, 1080p25 • Video Outputs Primary HD-SDI (BNC) Test/Setup TV Out (Test Point-adapter to BNC included), NTSC/PAL selectable • OSD menu for setup and configuration • Provides True Day / Night Capability with Motorized IR Cut Filter.
4.
5.
6. INSTALLATION 1 2 Lens Focus Knob Lens Zoom Knob 3 4 Separate LED Cover (Sunshield Cover) and adjust LENS ZOOM / FOCUS KNOB After setting the LENS, assemble the LED Cover (Sunshield Cover).
6. INSTALLATION • MONITOR CONNECTION - DC12V/AC24V BN C F E M ALE V ID E O HD SDI IN SDI RECEIVER DISPLAY DEVICE MONITOR DC 12V / AC 24V POWER SUPPLY - DC12V HD SDI IN BNC FEMALE V ID E O SDI RECEIVER DISPLAY DEVICE MONITOR DC 12V POWER SUPPLY - Service Video connector HANDHELD MONITOR OPEN COVER VIDEO IN Service Video Connector TEST CABLE When you install the camera, please glue up the end of cable to keep it stable in order to protect the camera from the humidity problems.
7. DIMENSIONS Unit(mm) 45 96.9 Ø100 Ø135 .
8. SPECIFICATION Model Standard Type LED Type SONY 1/3” 2.1M Progressive Color CMOS Image Sensor Image Device Effective Pixels 1984 (H) x 1105 (V) 30fps Unit cell size 2.8um (H) x 2.8um (V) Video Output Mode Minimum Illumination HD-SDI: 720p60, 720p50,1080p30, 1080p25 TV Out: NTSC / PAL selectable 0.
9.
9. OSD MANUAL Main DAY & NIGHT IMAGE SPECIAL SYSTEM Sub Menu Sub Menu D&N DETECT AGC / SENSE (LED Type Only) DELAY 1sec, 3, 5, 10, 15, 20, 25, 30, 40, 50, 60sec COLOR / D->N LEVEL 0 ~ 20(AGC) / 0 ~10(SENSE) B&W / N->D LEVEL 0 ~ 20(AGC) / 0 ~10(SENSE) AUTO RESET DATA BACK / DEF. RETURN BACK / EXIT. SHARPNESS 0 ~ 20 GAMMA 0~4 FLIP OFF, H FLIP, V FLIP, HV FLIP LENS SHADING OFF, ON DZOOM 1x, 2x, 4x, 6x, 8x, 10x, 12x, 14x, 16x, 18x, 20x RESET DATA BACK / DEF. RETURN BACK / EXIT. ZONE NO. 0 ~ 23 ZONE OP.
9. OSD MANUAL • Function Description 0. SETUP - EXPOSURE - WHITE BALANCE - WDR/BLC - DNR - DAY & NIGHT - IMAGE - SPECIAL - SYSTEM - RESET DATA ALL : Go sub menu for camera exposure control. : Go sub menu for camera white balance control. : Go sub menu for camera WDR or BLC action. : Control noise reduction setting. : Go sub menu for camera day & night control. : Go sub menu for adjust image functions. : Go sub menu for special feature control. : Go sub menu for system control & information.
9. OSD MANUAL 3. WDR/BLC - MODE • WDR • BLC • D-WDR - WDR WGT - BLC OSD - BLC POS-X - BLC POS-Y - BLC SIZ-X - BLC SIZ-Y : Select WDR / BLC mode. : Act in wdie dynamic rage mode. Controled video frame rate in 1/2. : Act in Backlight compensation mode. : Digital wide dynamic range control. : WDR weight control level settig at WDR mode. : Display BLC control zone in screen. : Select BLC control zone vertical position. : Select BLC control zone horizontal position. : Select BLC control zone vertical size.
9. OSD MANUAL - HLMASK • LEVEL • COLOR - PATTERN 8. SYSTEM - SDI FORMAT - SDI FPS - CVBS FORMAT • CVBS OUT ◦ ON, OFF ◦ AUTO • CVBS VIEW ◦ CROP ◦ FULL - SYSTEM INFO. • S/W VERSION • SET VERSION : Mask image high light area. : Select high light level. : Select mask color. : Color bar display Select. : 1080P / 720P. : 30 or 25 fps in 1080p mode. 60 or 50 fps in 720p mode. : NTSC / PAL. : Select mode for CVBS out action. : Enable or Disable CVBS out data. : Check automatically CVBS video cable connection.
