M 097- LP500- 002 High Contrast License Plate Capture Camera OPE RATI O N M A N U A L Thank you for choosing our high quality camera. Before attempting to connect operate this unit, please read and follow these instructions.
Contents 1 . CA UT IONS 2 . F E A T URES 3 . COMP ONENTS 4 . NA ME AND FUNCTION 5 . I NS T A LLATION 6 . F UN CT IONS 7 . T A R G E T MARKETS 8 . I NS T A LLATION GUIDE LI NE 9 . S P E C I FICATION 1 0 .
1. Cautions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1 . T h i s d e v i c e may n o t ca u se h a rmful inter fer ence. 2 . T h i s d e v i c e must a cce p t a n y i nter fer ence r eceived, including in t e r f e r e n c e th a t may ca u se u ndesir ed oper ation. Note T h is e q u i p m e nt h a s b e e n te ste d and found to com ply with the lim its f o r a C l a s s A d i gi tal de vi ce, p u rsuant to par t 15 of the FCC Rules.
1. Cautions Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2. Features • 1/3" Sony Super-HAD CCDⅡ • High Resolution 600TV Lines • Special filter and IR LED provides maximum readability despite headlight glare • Plate capture up to 35mph (56Km/H) • 9.0 ~ 22.0mm Varifocal Lens captures license plate from 8ft ~ 60ft (2.5M ~ 18.5M) • IP66 rated weather proof • Cable through concealed bracket • DC12V / AC24V Dual power with auto-polarity 3.
4. Name and Function ① ④ ① ② ③ ④ ⑤ ⑥ ⑦ ⑤ ② ⑧ ① ⑥ ③ ⑦ Su n s h i e l d L oc k B o lt Su n s h i e l d M ou n t i n g B r a c k e t I R L ED : 2 0 e a Ca m e ra B o d y Bo d y L o c k Rin g Ex t e rn a l Z o o m a n d F o c u s a d ju st ment s ⑦ TEST VIDEO OUTPUT ⑧ Co v e r T o A c c e s s Men u C o n tro ls & Test Video Out put Pressing the “SETUP” button prompts the main setup menu.
5. Installation • MOUNTING POSITION 360˚ 90 ˚ 360˚ Loosen socket head allen screws to change angle and/or rotate body about base. Loosen this lock ring to rotate camera body. After adjusting zoom and focus, to prevent water infiltration, firmly tighten the zoom and focus levers.
5. Installation • MONITOR CONNECTION DC12V / DUAL(DC12V/AC24V) DC12V (DC12V/AC24V) BNC FEMALE DC12V POWER SUPPLY (DC12V /AC24V POWER SUPPLY) VIDEO IN WHITE: TRIGGER SIGNAL BLACK: TRIGGER GROUND OSD CONTROL VIDEO TEST POINT CONNECTION HANDHELD VIDEO IN TEST CABLE Note: Face of connector with color mark should face “up” when inserting test cable. When you install the camera, please glue up the end of cable to keep it stable in order to protect the camera from the humidity problems.
6. Functions OSD Menu Structure • MO DE - INSTALLATION Installation Mode provides bright video screen to adjust angle and focus. - LICENSE-PLATE License-plate Mode provides high contrast and clear license plate image for license plate capture. • SHUTTE R SETUP ▶ MODE LICENSE-PLATE SHUTTER 1/250 FREEZE-TIME 5SEC NEG. IMAGE OFF EXIT SETUP 1/250, 1/500, 1/1,000 ~ 1/10,000. (After 1/1000sec, 1/500sec unit adjustment) - Adjusted when LICENSE-PLATE MODE is performed.
8. Installation Guideline C a m era H eight • Must consider height in distance calculation. • Sharper angle will alter appearance of plate. Camera Height (Ft) Horizontal Distance (Ft) 10 10 11 20 12 30 13 40 14 50 10 Capture Distance(Ft) 14.14 22.83 32.31 42.06 51.
8. Installation Guideline C a m era A ngle s • Vertical and horizontal angle must not exceed 40 degrees to get optimal view of the license plate. C a ptu re Z one • Wider angle provide shorter capture distance. • Tele angle provide longer capture distance.
8. Installation Guideline L a n e Wid th • • • • Narrow lanes = less variation in plate location. Wider lanes = more variation in plate location. Lens should cover entire width of the lane. Ensure horizontal field of view is wide enough. S peed • • • • Camera can capture moving vehicles up to 35mph. Keep camera as low as possible. Minimize horizontal angle. Zoom in the lens as close as possible.
8. Installation Guideline T r i gg er • • • • Camera support trigger input for freezing video screen. Connect external sensor e.g. Parking Gate Sensor. Trigger input should be pulled-up 3.3V DC in normal condition. Input line will be triggered when pull-up 3.3V DC drop to GND. DVR • • • • • Camera is fully compatible with industry standard DVRs. Check compression settings. Non-conditional refresh compression. (i.e. MJPEG or JPEG) D1 (720x480) resolution. 30fps (each channel) for best results.
9. Specification Signal Format NTSC Image Device PAL 1/3" Sony Super HAD CCDⅡ Total Pixels 811(H) x 508(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) 15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V) Inter. H/V H.Resolution 795(H) x 596(V) 600TV Lines Minimum illumination S/N Ratio 0 Lux (IR LED ON) More than 50dB (AGC Off) Sync System Internal Video Output 1.
10. Dimensions 87.8 unit: mm 82 145 120 224 7 M12 XP 1.0 Ф3.5(Ф0.14) 8 (Ф ree deg 100 120 Ф 2) 1.0 9 25.
Mount Guide 3-ø5.