M 145- N751- 001 HIGH PERFORMANCE Super Night Vision Camera O PE R AT ION MANUAL HIGH POWER LED T h a n k y o u f o r cho o si ng o u r hi gh q uality cam er a. Befor e attem pting to co n n e c t o p e r ate th i s un i t,pl ea se r ead and follow these instr uctions.
CA UTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
CONTENTS 1 . CA UT IONS 2 . I MP OR TANT SAFETY INSTRUCTI O NS 3 . F E A T URES 4 . COMP ONENTS 5 . NA ME AND FUNCTION 6 . I NS T A LLATION 7 . DIME NSIONS 8 . S P E C I FICATION 9 . O S D MANUAL 1 0 .
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
1. CAUTIONS Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2. IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
3. FEATURES • 1/3 960H SONY EXview HAD CCD II • High Resolution of 700TV Lines • OSD Function • Multi Language (ENGLISH, CHINESE, RUSSIAN, SPANISH, GERMAN, FRENCH, PORTUGUESE, JAPANESE) • 2DNR • Privacy Zone / Motion Detect • DC12V / AC24V Dual Voltage • ATR(Adaptive Tone-curve Reproduction / Digital WDR) The function provides gradation compensation to improve the contrast of subjects both low-luminance areas and high luminance areas exist in the same picture 4.
5.
5. NAME AND FUNCTION • Heater Heater Built in heater protects the camera from low temperature.
6.
6. INSTALLATION • MONITOR CONNECTION DUAL(DC12V/AC24V) DC12V/AC24V DC 12V POWER SUPPLY or AC 24V POWER SUPPLY VIDEO IN MONITOR DC 12V POWER SUPPLY or AC 24V POWER SUPPLY DC12V/AC24V BNC FEMALE DC12V VIDEO IN MONITOR RS485 DC 12V POWER SUPPLY DC12V VIDEO IN BNC FEMALE MONITOR DC 12V POWER SUPPLY DC12V BNC FEMALE When you install the camera, please glue up the end of cable to keep it stable in order to protect the camera from the humidity problems.
7. DIMENSIONS Unit : mm 89.5 83.0 98.6 10 POWER LED Photo cell 140 126.0 (256.5) 10 M12XP1.25 Ø95 12 135 125 106.
8. SPECIFICATION Signal Format Image Device NTSC PAL 1/3˝ 960H SONY EXview HAD CCD II Scanning System Scanning Frequency 2 : 1 Interlace 15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V) Total Pixels 1020(H) X 508(V) 1020(H) X 596(V) Effective Pixels Electronic Shutter Speed 976(H) X 494(V) 1/60 sec 976(H) X 582(V) 1/50 sec H.Resolution S/N Ratio 750TV Lines More than 50dB (AGC OFF) Min.Illumination LED On : 0 Lux Sync System Internal Gamma Video Output Level r= 0.45 1.
9. OSD MANUAL GENERAL STRUCTURE SETUP >FOCUS ADJUST EXPOSURE WHITE BALANCE BLC DAY&NIGHT IMAGE SPECIAL FACTORY DEFAULT EXIT [┛] [┛] [┛] [┛] [┛] [┛] [┛] FOCUS ADJUST FOCUS VALUE: 28 >FOCUS WINDOW RETURN ON EXPOSURE ... 7 ... 1/60 ... OFF ...
9.
9.
9.
9. OSD MANUAL OSD FUNCTION DESCRIPTION 1. FOCUS ADJUST : According to the brightness of light to minimize the depth of focus, to be more accurate to focus. - FOCUS VALUE: The higher the number, the focus will be a good fit. - FOCUS WINDOW: AF detector frame display ON/OFF. FOCUS ADJUST FOCUS VALUE: 28 >FOCUS WINDOW RETURN ON 2. EXPOSURE : Enable user to set up the function of BRIGHTNESS, SHUTTER, FLICKERLESS, AGC MAX. Set up using LEFT, RIGHT KEY at each menu.
9. OSD MANUAL 3. WHITE BALANCE : Enable user to represent the accurate white color by controlling the R,G,B level. Setting up LEFT, RIGHT KEY on each menu. - WB MODE ① ATW : Enable user to trace the White Balance automatically in the range of 2,300K~10,000K. ② PUSH : Enable user to search for White Balance automatically. In this mode, color temperature range is broader than ATW. ③ PUSH LOCK : Enable user to fix the White Balance according to the color temperature in the certain environment.
9. OSD MANUAL - BLC ZONE : Enable user to set the BLC area TOP -> TOP, BOTTOM, CENTER, LEFT, RIGHT. - BLC LEVEL : Enable user to set BLC in selected LEFT area(0~15 level). CENTER RIGHT - INITIAL : Enable user to initialize the BLC setting. BOTTOM 5. DAY&NIGHT : Conversion of output image COLOR / BW depending on exterior environment Enable user to set the LEFT, RIGHT KEY in menu. - D&N MODE ① COLOR : Enable user to fit the output image in color. ② B/W : Enable user to fit the output image in B/W.
9. OSD MANUAL 6. IMAGE : MIRROR, DNR, SHARPNESS functions set up by pressing LEFT, RIGHT KEY. IMAGE >MIRROR DNR DNR LEVEL SHARPNESS INITAL RETURN OFF ON 4 8 (OFF) (ON) - MIRROR: Enable user to reverse the image. - DNR : This function reduces noise by undertaking spatial filtering for one image. (Outline of DNR function) - DNR LEVEL : Enable user to set level(0~15 steps). - SHARPNESS : Enable user to control the image sharpness (0~15steps).
9. OSD MANUAL - CAM TITLE : Enable user to choose any word in screen(Maximum 10 letter is available) ① A letter Choice from the screen using menu key. ② Enable user to move to next menu using LEFT, RIGHT KEY in LOCATION. ③ By using UP, DOWN, LEFT, RIGHT KEY, enable user to choose any letters in LOCATION and then get back to previous step. ④ Enable user to finish words choice and position by using LEFT, RIGHT KEY in RETURN.
9. OSD MANUAL - MOTION DETECT : Motion detection function. ① MOTION MODE : Enable user to set up ON/OFF ② LEVEL : Enable user to setup a motion detect sensitivity (0~3) ③ V START : Motion area Vertical start position. ④ V END : Motion area Vertical end position. MOTION DETECT ⑤ H START : Motion area Horizontal start position. ⑥ H END : Motion area Horizontal end position. >ZONE NO MOTION MODE ⑦ INITIAL : Enable user to initialize setting of LEVEL MOTION DETECT.
10.
MEMO
MEMO
Mount Guide 4-ø6.