M099-VDE101-004 HIGH RESOLUTION VANDAL DOME CAMERA O P E R AT I ON M ANUAL T h a n k y o u f o r cho o si ng o u r hi gh q uality cam er a. Be f o re a t t e m p t i ng to co n n e ct o r op er ate, please r ead and follow th e se i n s t r u c t i on s.
CONTENTS 1 . Cau ti o ns 2 . F eatu re s 3 . E q u ip m ent and Ac ce ssor i es 4 . O vervi ew and func tion 5 . I n stal l ation 6 . Co n n ection 7 . Dimen sions 8 . S p ecific ations 9 .
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
1. CAUTIONS Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2.
3. Equipment and Accessories 1 VANDAL DOME CAMERA 2 SURFACE MOUNT 3 VIDEO OUTPUT TEST CABLE 4 OPERATION MANUAL 5 SCREW(M4x10) - 4ea SCREW(5x30) - 4ea SCREW(M4x40.
4.
5. Installation Mount Guide Lens Focus Knob Lens Zoom Knob Separate LED Cover (Sunshield Cover) and adjust LENS ZOOM / FOCUS KNOB After setting the LENS, assemble the LED Cover (Sunshield Cover).
5. Installation 1. Installation of Flush Mount ① Installation of the camera with SURFACE CASE(using M4x40) ② Installation of the camera with SCREWS ③ Installation of the camera with JUNCTION BOX PIPE 2.
6.Connection • MONITOR CONNECTION • DUAL(DC 12V/AC24V) BNC Female Video Video in DC12V / AC24V Regulated power supply • DC 12V BNC Female Video Video in DC12V Regulated power supply When you install the camera, please glue up the end of cable to keep it stable in order to protect the camera from the humidity problems.
7.Dimensions Unit : mm Surface Mount Type Type A Type B Flush Mount Type 70˚ 70˚ LED Type Standard Type When you fix the focus around 22.0mm in f9.0-22.
8.Specifications Signal Format PAL NTSC Image Device 1/3˝ 960H SONY EXview HAD CCD II Scanning System 2:1 Interlace H.Resolution 700TV Lines H:15.734KHz, V:59.94Hz H:15.625KHz, V:50Hz Total Pixels 1020(H) X 508(V) 1020(H) X 596(V) Effective Pixels 976(H) X 494(V) 976(H) X 582(V) 1/60 sec 1/50 sec Scanning Frequency Electronic Shutter Speed S/N Ratio More than 50dB(AGC Off) r=0.45 Gamma Min. Illumination COLOR : 0.05Lux/F1.2, BW : 0.02 Lux/F1.2 Sync System Internal Video Output 1.
9. OSD MENU STRUCTURE MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU MANUAL LE NS AUTO T YPE DC M ODE AUTO,OPE N ,C LOS E SPEED ( 0 00 ~ 255) RET URN HIGH L UM INANCE AUTO L OW L UM INANCE M OD E SHUT,AUTO IRIS, SHUT+AUTO IRIS BRIGH TN E S S (000 ~ 255) M OD E A GC ,OFF BRIGH TN E S S x0.25,x0.50,x0.75,x1.
9.
