Owner manual

30
8. OSD MANUAL
- MOTION DET : Motion detection and Face detection function.
①
MOTION MODE : Enable user to set up ON/OFF.
②
LEVEL : Enable user to setup a motion detect sensitivity (0~15).
③
FACE MODE : Enable user to set up ON/OFF.
④
LEVEL : Enable user to set up a face detect sensitivity (0~15).
⑤
V START : Mask Vertical start position.
⑥
V END : Mask Vertical end position.
⑦
H START : Mask Horizontal start position.
⑧
H END : Mask Horizontal end position.
⑨
INITIAL : Enable user to initialize setting of MOTION DETECT.
- DISPLAY : Enable user to set up a screen marking
of CAM ID, CAM TITLE, MOTION, FACE
①
CAM ID : Enable user to set up output on
Camera ID screen.
②
CAM TITLE : Enable user to set up output
in xed CAM TITLE.
③
MOTION DETECT : Enable user to set up out
put of MOTION on the screen as MOTION
DET ON setting.
③
FACE DETECT : Enable user to set up out put of
FACE on the screen as FACE DETECT ON setting.
④
INITIAL : Enable user to initialize of DISPLAY menu.
8. FACTORY DEFAULT
: Enable user to reset all of the status as the factory default
Setting up using LEFT, RIGHT KEY.
9. EXIT
: Enable user to EXIT the OSD menu Setting up using LEFT, RIGHT KEY.
MOTION DET
>MOTION MODE
...
ON
LEVEL
...
08
FACE MODE ... ON
LEVEL ... 07
V START ... 01
V END ... 06
H START ... 01
H END ... 10
INITIAL
RETURN
DISPLAY
>CAM ID
...
OFF
CAM TITLE
...
OFF
MOTION DETECT
...
OFF
FACE DETECT
...
OFF
INITIAL
RETURN