Owner manual

8.Operating Camera
3. Select the desired feature using the TELE and WIDE button.
• The indicator moves up and down in the main menu feature.
• Move the arrow indicator to the desired feature.
4. Change the status of the selected feature using the NEAR and FAR
button
• Pressing the NEAR/FAR button, the sub-menu is displayed.
• Press the TELE/WIDE button to move up and down the sub-menu.
category and set each category by pressing the NEAR/FAR button.
• When completed, move the arrow indicator to "RETURN" and press the
NEAR/FAR button.
5. Press the MENU button at the main-menu or sub-menu screen to hide the
menu.
• It does not apply when the MENU button is used for other uses.
SETUP
1.LENS [ ┛ ]
2.EXPOSURE [┛]
3.WHITE BALANCE [┛]
4.WDR/BLC [┛]
5.DAY&NIGH [┛]
6.IMAGE [┛]
7.SPECIAL [┛]
8.FACTORY DEFAULT
9.EXIT
LENS
FOCUS MODE … AUTO
FOCUS LIMIT … 50CM
ZOOM START … X1
ZOOM STOP … X360
ZOOM SPEED … V-FAST
E-ZOOM … ON
INITIAL
RETURN
6. FACTORY DEFAULT
• All menu will be initialized except for the Camera ID
20 21