M119-SPDN300-002 30X Optical MINI SPEED DOME CAMERA U se r’s M a n u a l A b o u t t h i s ma n u a l Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
C AUT I O N These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Contents Cautions 4 IMPORTANT SAFETY NSTRUCTION 6 1. Overview 7 1 1 Features 1.2 System Configuration 1.3 Termination Settings 7 8 8 2. Installation and Connection 2.1 Package Contents 2.2 Base Installation 2.3 Wall Mount Bracket 2.4 Connection Interface and Wiring cables 2.5 Setting Dome Camera 3. Program and Operation OSD Menu Structure 3.1 Getting Started 3.2 Main Menu 3.3 System Setup Menu 3.4 Display Setup Menu 3.5 Camera Setup Menu 3.
Cautions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Cautions Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
1. Overview 1.1 Features The PTZ Dome shall be quickly to install and be able to offer the services described in this document by way of an interface unit. Its mechanical architecture is designed to ensure adequate mechanical attachment to the wall of a dwelling. Details shall be provided as to how the PTZ Dome is to be installed. A building block for any surveillance / security system is composed of PTZ domes and Controllers.
1. Overview 1.2 System Configuration MULTI PLEXER 1.
2. Installation and Connection 2.1 Package Contents Camera Template Manual Screws / Plastic anchors / Wrench / O-Ring Screws (#8(Ø4.
2. Installation and Connection 2.2 Base Installation - Make holes for mounting and cable hole in the ceiling place to which the dome camera is installed using the template sheet. - Extract the cable through the (cable) hole and connect the connector of terminal block in the dome - Fix the dome base firmly with supplied mounting screws(4) - Lock the housing cover with torx screws(4) 2.
2. Installation and Connection 2.4 Connection Interface and Wiring cables * Caution Do not connect the power cable until all other connections have been completed. After removing the protection sheet (PE form), supply the power to the dome camera. 2.4.1 Connecting the RS-485 lines The dome camera can be controlled remotely by an external device or control system such as a controller using RS-485 half duplexer (RS-485 Connection). A repeater is recommended to extend over 1.2 Km. 2.4.
2. Installation and Connection 2.5 Setting Dome Camera The device can communicate with external switching device such as multiplexer or DVRs by setting the Rotary switch and Dip switch. Refer to tables below for setting the dome camera ID and protocol selection. Total length of the cable for communication should not exceed 1km. 2.5.1 Setting the address (ID) of dome camera To prevent wrong operation and malfunction, each dome camera has a unique address (ID). The default setting is 0[ID001].
3. Program and Operation [OSD Menu Structure] - Main Menu/Editing Title MAIN MENU TITLE SYST EM SET U P D I SPLAY SET U P C AMER A SET U P D O ME MO T I O N PR ESET SET U P PAT T ER N SET U P T O U R SET U P SC AN SET U P ALAR M SET U P EXI T - Operation Menu 13 ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789/+-=:?!#.
3.
3. Program and Operation This manual is designed to be a reference for the programming and operation of the system. You can see information about features of the dome and commands as well as an operation method. The symbols below mean some action of the joystick controller. ▲/▼: move joystick up and down ◀/▶: move joystick left and right direction ▶: select or change values [Tele/Wide]: move joystick clockwise or counter-clockwise for zooming [KEY]: press the defined key.
3. Program and Operation 3.1 Getting Started You should install and connect the dome to an interface device before using this operating guide. Refer to {2. Installation and connection of this manual}. Once installed, apply power to the dome and the start-up screen is displayed on the monitor. X30 M INI SPEED DOM E V x.xx.x RS485/2400 ID001 CAM TEST ...PASS Before installing and operating the dome camera, please read this user’s manual carefully.
3. Program and Operation 3.2 Main Menu MAIN MENU SYST EM SET U P D I SPLAY SET U P C AMER A SET U P D O ME MO T I O N PR ESET SET U P PAT T ER N SET U P T O U R SET U P SC AN SET U P ALAR M SET U P EXI T ▲/▼: move joystick up and down for selecting an item. ◀/▶: move joystick left and right for moving an item. ▶/ [Open]/ [Near]: move joystick right to select or save values or go to edit pages. ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu. (Back to previous menu without saving) 3.
3. Program and Operation 3.3.2 Reboot REBOOT C O N T I N U E? YES : N EAR N O : F AR Reboot the system if there are some anomalous problems to control or operate the domes. Rebooting the system will recycle power of dome and camera without changing settings of dome. - Enter into {Main Menu} - Select {System) using joystick and move to {Reboot} in the sub menu of {System} - To {Reboot} the system, Press [Near] key. - To cancel Reboot, Press [Far] key. 3.3.
3. Program and Operation 3.3.4 Entering a Password PASSWDRD C U R R EN T EN ABLE N EW CONFIRM : : : : ... D I SABLE ... ... 0123456789 -SET / C LEAR : (T ELE/ WI D E) -EXI T : (F AR ) To prevent unauthorized changes to the dome settings, the dome have the feature of password protection. An unauthorized operator cannot access to any of the dome settings menus. The password must be entered before programming. The valid password with four characters must be entered to continue programming.
3. Program and Operation 3.4.2 OSD Setup OSD SETUP - T I T LE LA B E L P O S I T I ON : O F F T I ME : ON ZOOM : OFF ID : ON MO D E : ON A N G LE : 3SEC SAVE : O PEN BACK : C LO SE - CHANGE : (LEF T / R I G H T ) - TO SETUP : (T ELE) ER R O R MSG - EXI T : F AR ZOOM - MO D E - D T I ME - ID - AN G LE - You can see only video or some character with video. Each element is able to handle. OSD setup allows you to program how labels are displayed on the monitor.
3. Program and Operation 3.4.4 Image Setup IMAGE SETUP MI R R O R : N O R MAL SAVE BAC K : O PEN : C LO SE This menu is for changing displayed image settings. - Enter into {Main Menu} - Select {Display} and move to {Image Setup} using joystick[▶]. - Using joystick [▶], Normal image, Horizontal image, Vertical image or H/V image can be selected. - Press [Open] button or use joystick to save settings. - Press [Close] button or use joystick to return to previous menu (Back). 3.4.
3. Program and Operation 3.5.1 Focus/Zoom FOCUS/ZOOM SETUP FOCUS : AU T O Z O O M SPD : V-F AST D.ZOOM : OFF R EF R ESH MO D E : O F F R EF R ESH T I ME : xD AY xxH O U R SAVE BAC K : O PEN : C LO SE Auto Focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions automatically. Zoom speed allows the user to define how fast the dome will go from full wide zoom to the 30X optical zoom. There are four modes (Slow, Normal, Fast, and V-Fast). D.
3. Program and Operation 3.5.3 AE Setup (Auto Exposure Setup) AE SETUP MO D E SH U T AG C G AI N AG C MAX D SS BR I G H T : : : : : : F U LL AU T O HIGH OFF 06 SAVE : O PEN BAC K : C LO SE Shutter speed is the duration of the electronic shutter. Set the shutter speed to operate automatically (Auto) or manually (Numeric Value). Shutter speed is the duration of the electronic shutter. Set the shutter speed to operate automatically (Auto) or manually (Numeric Value).
3. Program and Operation 3.5.5 Advanced Setup ADVANCED SETUP SH AR PN ESS BAC KLI G H T : 10 : OFF SAVE : O PEN BAC K : C LO SE Brightness increases as the number gets higher. The backlight compensation function provides compensation by increasing the brightness of the overall screen so that subjects being shot with a loss of dark detail due to backlight will have just the right brightness level.
3. Program and Operation 3.6 Dome Motion Menu DOME MOTION SETUP G EN ER AL SET U P MO T I O N SET U P H O ME AC T I O N C ALI BR AT I O N EXI T ▲/▼: move joystick up and down for selecting an item. ◀/▶: move joystick left and right for moving an item. ▶/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages. ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back). 3.6.1 General Setup GENERAL SETUP PO WER -U P AC T .
3. Program and Operation 3.6.2 Motion Setup MOTION SETUP PR O P.
3. Program and Operation 3.6.4 Calibration Setup CALIBRATION SETUP C O N T I N U E? A U T O C A L : AU T O E R R O R MS G DI SP : O F F C A LI B R A T I O N YES : N EAR N O : F AR SAVE : OPEN B A C K : C LO S E - Set calibration mode for Manual/Auto using the joystick [▶]. - In manual mode, select {Calibration} to execute {Calibration} using the joystick[▶], and press [Near] button or use joystick to continue. - Set {Error Message Display} for On/Off using the joystick [▶].
3. Program and Operation The dome has maximum 210 preset positions. Each of the user-defined presets includes Pan/Tilt/ Zoom. Use the following steps to program {Preset}. PRESET SETUP PR ESS MO VE KEY SAVE : N EAR BAC K : F AR - Enter into {Main Manu} - Select {Preset} and Move left or right to select Preset Number. - Move the joystick right [▶] to edit a {Preset} - Using the joystick, move to a desired target (Pan/Tilt/Zoom) - Press [Near] button or use joystick to save settings.
3. Program and Operation Use the following steps to program {Pattern}. PTIME: 022 START POSITION SETUP PATTERN SETUP PR ESS MO VE KEY ST AR T : (N EAR ) SAVE : (N EAR ) EXI T : (F AR ) - Enter into {Main Manu} - Select {Auto Scan} and move left or right to select {Pattern} Number. - Move the joystick right [▶] to edit {Pattern} - Using the joystick, move to a desired target and press [Near] button to start programming {Pattern} - Press [Near] button or use joystick to save settings.
3. Program and Operation 3.10 Auto Scan Menu SCAN SETUP N O . 001 : N O T U SED ED I T : SPEED : D T I ME : D I R EC T I O N : MO D E : C LEAR SAVE : O PEN BAC K : C LO SE ▲/▼: move joystick up and down for selecting an item. ◀/▶: move joystick left and right for moving an item. ▶/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages. ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back).
3. Program and Operation 3.11 Alarm Menu ALARM SETUP N O . 001 : N O T U SED IN : OUT : PR I O R I T Y : AC T I O N : N U MBER : D T I ME : SAVE : O PEN BAC K : C LO SE - SET / C LEAR : (T ELE/ WI D E) ▲/▼: move joystick up and down for selecting an item. ◀/▶: move joystick left and right for moving an item. ▶/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages. ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back).
4. Troubleshooting Guide If problems occur, check the installation of the dome with the instructions in this manual. And refer to this manual for further information. Pr o b l e m So lu t io n No video on the screen - Verify that power is connected to all components in the system. - Verify that the power switches are ON. - Verify the status of cables or connection of cables Poor video quality.
5. Specifications Image Device Effective Pixels Resolution Lens View Angle Approx. Min. illumination S/N Ratio WDR DNR Privacy Masking Electrical Power Supply Power Requirement Power Consumption Alarm Output Alarm Input Control Access Time ID (Camera Address) Mechanical Weight 1/4" Sony Double Scan, Super HAD CCDⅡ NTSC: 976(H)*494(V), PAL: 976(H)*582(V) 750 TVL 30X Optical /10X Digital Zoom(Auto Focus) Approx. 69.5° (Wide end) to 2.46° (Tele end) 0.2 Lux/ F1.65, 0.001 Lux/DSS, 0.
6. Dimensions [Unit: mm] 26 79 138 Ø112 Ø151.3 Ø154 85.6 4-Ø4.8 85.
APPENDIX. Pelco Protocol function List LCD DISPLAY Function Keys > F1(PSET), F2(TOUR), F3(PATT), F4(SCAN) ESC/POWER Joystick Number Controller Function Keys Camera Focus control > NER / FAR, TELE / WIDE Based on WTX1200A Function Preset Preset shortcut saving Run PAN Run PAN ZERO Scan Setup Scan Tour Setup Tour Pattern Setup Pattern ENT Key Run HOME CLR Key ENT2 Key MENU Key ESC Key D. Zoom (Toggle) Key Preset Preset No. 1~59, 101~253 1~59, 101~253 33 No.+Preset 33+Preset - Preset 34 No.
Camera ID Chart ID S301 S302 ID S301 S302 ID ID S301 S302 ID S301 S302 1 0 1 52 3 4 103 S301 S302 6 7 154 9 A 205 C D 2 0 2 53 3 5 104 6 8 155 9 B 206 C E 3 0 3 54 3 6 105 6 9 156 9 C 207 C F 4 0 4 55 3 7 106 6 A 157 9 D 208 D 0 5 0 5 56 3 8 107 6 B 158 9 E 209 D 1 2 6 0 6 57 3 9 108 6 C 159 9 F 210 D 7 0 7 58 3 A 109 6 D 160 A 0 211 D 3 8 0 8 59 3 B 110 6 E 161 A 1 212 D 4 9
