Owner manual

3. Program and Operation
3.4.4 Image Setup
This menu is for changing displayed image settings.
- Enter into {Main Menu}
- Select {Display} and move to {Image Setup} using joystick[▶].
- Using joystick [▶], Normal image, Horizontal image, Vertical image or
H/V image can be selected.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
3.4.5 Motion/Face Detection
The dome camera can monitor the movement of image, and it sends an alarm message with
OSD and Alarm Out action. The level for sensitivity can be changeable.
* Note:
To stop alarming temporarily (about 10sec), press [ESC] button or [96+preset].
- Set MD/FD for Off / MD / FD using the joystick.
- Set Alarm mode for OSD / Alarm Out / Both using the joystick.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
3.5 Camera Setup Menu
▲
/
▼
: move joystick up and down for selecting an item.
◀
/
▶
: move joystick left and right for moving an item.
▶
/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages.
▶
/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back).
21
IMAGE SETUP
MIRROR : NORMAL
SAVE : OPEN
BACK : CLOSE
MOTION/FACE DETECTION
MD/FD : OFF
SENSITIVITY :
ALARM :
DTIME :
SAVE : OPEN
BACK : CLOSE
CAMERA SETUP
FOCUS/ZOOM
W-BALANCE
EXPOSURE
DAY/NIGHT
ADVANCED
WDR/DNR
EXIT