Manual

188
11.4.2 Speed Dome Setup
 Press + in SPD Mode to enter Speed Dome Setup and enter password. (Default password is 0000)
Keyboard Detail Option
ADDRESS Camera ID number 1~255
MODEL Select Camera -
PROTOCOL Set Protocol PEL-D / PEL-P / W-DRX / SAM-E / LGP /
SAM-T / PANAS / VICON / AD / HWELL
BAUDRATE Set Baud rate 2.4Kbps~57.6Kbps
PARITY Set Parity NONE / EVEN / ODD
PROP Set Camera speed
Slow PTZ => PROP: ON
Speed PTZ => PROP: OFF
11.4.3 Joystick Calibration
 Press + to enter Joystick Calibration and enter password. (Default password is 0000)
Keyboard Detail Option
PTZ OFFSET Rest position value setting -
PAN LEFT Left Pan value setting -
PAN RIGHT Right Pan value setting -
TILT UP Tilt Up value setting -
TILT DOWN Tilt Down value setting -
ZOOM WIDE Zoom Wide value setting -
ZOOM TELE Zoom Tele value setting -
11.5 Operation
11.5.1 DVR/SPD Mode Conversion
 Press “System ID” + “ ” to enter DVR control Mode.
 Press “Speed Dome Camera ID” + “ ” to enter PTZ camera control Mode.
Example
 If user wishes to connect to SYSTEM ID 3 DVR then press Num Pad “ “ + “ ”.
 If user wishes to connect to Speed Dome camera ID 3 then press Num Pad “ “ + “ ”.
11.5.2 DVR Control Mode
11.5.2.1 Connection
 If the DVR Control Mode is selected followings will appear on Keyboard LCD and Live OSD as “KBD:#” on the right-bottom
corner.