Manual

59
HD-SDI Input (CH 5 ~ 8)
360x 240(288) 720x240(288) 720x480(576) 1280 x 720 1920 x 1080
4 Channel SDI
Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel
Click ( ) each frame on ‘Quality’ column to select recording quality of a corresponding camera. User may select its
recording quality from Super, High, Std and Low.
Click ( ) each frame on ‘Duration’ column to select recording duration (i.e., 10 second ~ 1 hour) of a corresponding camera.
User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.
Choose ‘OK’ to confirm the setting.
NOTE
E, F, G, H and I Type DVR can detect 1080i, 1080p or 720p HD-SDI signals. If user connected Camera before the booting, each
signal is automatically detected and recognized (Auto Detection).
CAUTION
IF USER CONNECTS DIFFERENT TYPES OF HD-SDI SIGNALS WHILE DVR IS OPERATING. IT MAY CAUSE MALFUNCTIONS OF DVR.
4.5.2 Schedule
Please click ( ) RECORD>Schedule.
Each weekday is composed of 24 ‘Time blocks’. Each block represent 1 hour.
Click ( ) Camera frame to select Camera No. 1.
Please set the recording mode as follows:
Mark a check box the desired recording mode in the schedule (i.e., Continuous, Alarm, Motion and Pre Alarm). If user
wants to stop recording, please clear all check boxes.
Click block, row, column or all (square box) to register desired recording mode.
- Click ( ) a block and only the block will be registered.
- Click ( ) a row (S~H) and the entire row will be registered.
- Click ( ) a column (00~23) and the entire column will be registered.
- Click ( ) a square box (top-left side between ‘S’ and ‘00’) and all the rows/columns will be registered.
Repeat the procedure for Camera Nos. 2 to 16. If user wants every camera to have the same mode, please click ( ) Copy
to All Camera.
Below lists symbols of the respective recording modes.
Continuous
Alarm In
Alarm In / Continuous
Alarm In / PreAlarm
Motion
Motion / Continuous
Motion / PreAlarm