Ver. H_R1_1.1_ENG For safe use of system and to prevent product failure or accident, please read this manual carefully before use.
Before Usage This product has been designed and manufactured to assure personal safety. Improper use can result in electronic shock or fire hazard. The safeguards incorporated in this product will be protected you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by user.
CONTENTS 1. Summary Feature …………………………………………………………………………………………………… 6 2. Installation ∙ Contents ………………………………………………………………………………………………… 7 ∙ Rear panel ……………………………………………………………………………………………… 8 ∙ Video Input……………………………………………………………………………………………… 9 ∙ Loop Throughout put………………………………………………………………………………… 10 ∙ VGA output …………………………………………………………………………………………… 10 ∙ RS-485 connection (PTZ camera)………………………………………………………………… 10 ∙ RS-485 (Ext.
∙ ∙ ∙ ∙ ∙ ∙ Camera Setup…………………………………………………………………………………………… 36 Camera Title…………………………………………………………………………………………… 37 PTZ Setup……………………………………………………………………………………………… 37 PTZ Touring…………………………………………………………………………………………… 39 How to use PTZ……………………………………………………………………………………… 40 Serial port setup……………………………………………………………………………………… 44 8. Display setup ∙ OSD……………………………………………………………………………………………………… 45 ∙ Split Mode……………………………………………………………………………………………… 45 ∙ Display…………………………………………………………………………………………………… 50 9.
1 — Summary Feature This Stand Alone Digital Video Recorder is capable of high quality of video and audio data recording and provides various ways of data search by Calendar, Date/Time and event. Also the system allows remote user to access in order to monitor and control multiple local DVRs via TCP/IP / LAN connection.
Battery for remote controller Size : AAA 1.5V X 2EA DIGITAL RECORD VIDEO Adaptor Accessories. ㆍ Digital Recorder ㆍ HDD (8pcs) ㆍ Program ㆍ Manual (1EA) ㆍ Power code (1EA) ㆍ Remote controller) ㆍ Battery AAA (1.5V 2EA) ㆍ Adaptor (1EA) Video (1EA) Fixing CD (1EA) [Note] Check the accessories before use.
( KVR-H410AN ) ( KVR-H920AN ) ( KVR-H1640AN ) 7
[1] Video Input [2] Loop Through [5] RS-485 [6] Alarm output [9] Audio Input [10] Audio output [13] Composite Out [14] SPOT OUT [3] RJ-45(Ethernet) [7] Sensor Input [11] S-Video [15] Power Input [4] USB 2.0 port [8] Serial Port (RS-232) [12] VGA Out [16] Power switch Video Input Connect video cable from camera to the BNC connector. Loop Through Out put Loop out for each camera image without any image processing or disturbance. VGA Output Connect the PC monitor (LCD / CRT).
RS-485 connection (PTZ camera) PTZ Camera Connect the PTZ camera which is supporting its protocol as per the above diagram. RS-485 (External keyboard connection) Connect the external keyboard that should be purchased by the DVR manufacturer. Alarm out connection DVR supports 1 alarm output as above diagram.
DVR supports 4 Sensor input as above diagram. RJ-45 port (Internet connection) The network connection can be made through the 10/100/1000Mb Ethernet connector by RJ45. USB port DVR supports two USB 2.0 port on front and rear panel for mouse control, firmware upgrade and backup use. How to call Setup menu DVR can be operated by using front buttons, remote controller and mouse. ∙ By front button Press “MENU” button. ∙ By remote controller Press “MENU” button on the controller.
3 — System configuration Front panel button (Front button) (Mouse menu icon) 11
(Remote controller) [1] MENU · Call main menu · Move back to previous menu [2] PTZ Button to call PTZ controller menu, PTZ channel must be selected as full screen first. [3] IR Receiver Receive the IR signal from remote controller. [4] SEARCH Call search menu to playback record image. [5] QUAD Switch to multi-channel mode. [6] LOG OUT(KEYLOCK) • Using front button or remote controller, press and hold (about 4 sec) to log out. • Using mouse, click the “LOCK” icon then front button operation is restricted.
Select an audio channel. [10] AUTO SEQUENCE To display each camera in sequence, display duration is selectable in DISPLAY menu. [11] BACKUP Call backup menu to start recorded data archiving to external media. [12] Channel / Numeric button Refer to the “Front direction button” page. [13] LED LED shows the status of operating. • POWER : Highlight when power is on. • RECORD : Highlight when DVR is recording. • NETWORK : Highlight when DVR is connected by network.
Front direction key [1] Left button ∙ Menu move to left ∙ Reverse playback speed control [2] Upper button ∙ Menu move to up ∙ Change split mode in live [3] Playback and Confirmation button • Confirm the configuration in setup menu. • Play / Pause button in search mode. • Log out (Press more than 2 second) • Stop beep and show error list when system error. [4] Right button ∙ Menu move to the right. ∙ Playback speed control [5] Lower button ∙ Menu move to down • Stop button in search mode.
Icon Daylight Saving Time Network connection icon Emergency recording Sensor recording Schedule recording Motion detection Key lock status icon Video Loss Auto sequence icon Record icon Internet connection icon De-interlace icon How to setup the remote controller ID In order to use remote controller, the ID must be same both DVR and remote controller. By assigning DVR ID, it allows the user to control multiple DVRs with one remote controller.
[3] Remote controller ID menu displays as above image when you click ID button of remote controller. ∙ DVR ID : It displays current ID of the system. ∙ “00” : Input the same ID number of DVR and press “Confirm” [Note] ∙ The DVR can be controlled once the ID between the DVR and remote controller is same so, if the DVR is not working, please check the ID.
4 — System configuration INFORMATION [1] Language : Select a language [2] REMOCON ID : Assign the ID of remote controller, so that user can separately control multiple DVR unit with one controller. (ID range: 0 ~ 99) [3] MOUSE Sensitivity : Mouse sensitivity level can be adjusted at user’s convenience. (Basic Level 1; Slow speed, Level 1 < Level 2 < Level 3 to increase reaction speed.
Date/Time [1] YY / MM / DD : select a display format. • ASIA : YYYY/MM/DD --> 2006/05/31 • US : MM/DD/YYYY --> 05/31/2006 • EURO : DD/MM/YYYY --> 31/05/2006 [2] Daylight Saving Time : It is commonly called as “Summer time”. During the period, user can change system time 1 hour early or late. [3] Time Server : It helps time set of DVR automatically by synchronization of time server service.
[1] User ID : Able to input max. 8 user’s account. [2] User Group : Select a group which is defined by functionality. ∙ admin : Able to use all functions. ∙ power User : Able to use Configuration, Search, Backup. ∙ User : Choose a function to use. [3] Password : Input the new P/W for the selected ID. (Max. 8 digit) [Note] Default password of all ID is “11111111”. [4] Authority : Select a function to allow on each user’s authority. [5] Camera allocation : Select an allowable camera on each user.
[1] Disk1 : Priority disk drive information.. • Main Disk : Use as a recording disk. • Mirror Disk : Use as a mirroring disk. • None : No use. [2] DISK2 : Secondary disk drive or ODD (CD/DVD-RW) information. In case of using ODD, “RW Write” info will be shown. • Main Disk : Use as a recording disk • Mirror Disk : Use as a mirroring disk • None : No use. [3] FORMAT : Initialize a disk drive. [4] TOTAL : Display total HDD capacity.
menu. Copy firmware USB Memory Stick [NOTE] Do not turn off power or remove USB stick while backup is being procedure. Button Setup Button setup (Front, Mouse, Remote controller and Button beep) [1] Button Beep : It makes beep sound while the button is pressed. [2] Auto Key Lock : It prohobits button use. ∙ On : It asks the password for the important buttons.
DEFAULT SETTING • Default Setting : Except major configuration (Network, Password), parameters are initialized. • Factory Setting : All parameters are initialized. Configuration • Configuration Upload : Upload a configuration file to DVR. • Configuration Download : Save a configuration file of DVR.
LOG OUT In live mode, press “CONFIRM” button for 4 second to log out. 5. — RECORD Record Set up recording resolution, frame and quality on each channel. 1] Pre Recording In case of event, DVR can record the image priot to 5~6 second from event time. [2] Water Mark : To protect forgery or edit of image, check a Watermark. [3] Enable / Disable record : Once click the camera icon, user can select the recordable channel.
[7] Post REC : Duration of event recording. [8] Audio : Select a channel for audio recording. (AUDIO RECORD ON) (AUDIO RECORD OFF) Schedule Record Set up the recording schedule. [1] Select a channel. [2] Choose a recording mode and designate the time and date. Motion : Record when motion detectected. Sensor : Record when sensor triggered. Motion+Sensor : Record when mortion detectected or sensor triggered. Continuous : Record continuously. Erase : Cancel a parameter.
Choose a day on the calendar and set up schedule using by direction button and “CONFIRM” button. [1] Channel : Select a channel. [2] Choose a date to register holiday on calendar. [3] Select a event icon then set the time.
[4] Clear Holiday : To delete registered holiday, select a date using “START” and “FINISH” and press ”CLEAR”. [5] Applied channel : To apply configured holiday schedule to all or individual channel. ① Save holiday schedule. ② Apply to all channel ③ Select an individual channel. 6 — N/W Setup IP Address It is the system setup for remote mornitoring or backup and it needs the network setup of DVR. The user must know whether their internet is dynamic IP(DHCP) or fixed IP.
[1] DHCP : It uses for dynamic IP user (On). The static IP user does not need the DHCP function (Off) [2] IP Address : The dynamic IP user does not set it up. If you use the static IP, input the following information after ask it to ISP. [Sample] ㆍIP ADDRESS : 192.168.010.003 ㆍSUBNET MASK : 255.255.255.000 ㆍGATEWAY : 192.168.001.001 ㆍDNS : 168.124.101.002 [3] DDNS address : It is for dynamic IP user, do not change the DDNS address.
[6] Web Server Port Since there is Built-in webserver, if you know the IP address, you can direct connect to DVR through web browser. The default port is 80. (Example) You can use with fixed IP and DNS service -Fixed IP. If the DVR IP is 192.168.010.003, you can simply enter ‘http://192.168.010.003 80’ on URL, then monitoring program is automatically executing. This connection is possible in LAN and Fixed IP using condition. If the port is 80, it can be deleted.
E-Mail Setup It notice the event to the user. E-mail setup It is the basic setup for e-mail sending. Since it will not send the mail if the setup is wrong, please be cereful. [1] Mail server(SMTP SERVER) : Mail sending server. Input the mail server address of user. Input the send mail(”SMTP) address. If you are not sure, please contact your mail server manager. [2] USER PORT : Most mail server use port 25 so, if it doesn‘t work, pleas check the port No.
E-Mail Notification [1] Mail Title : Input the mail title. [2] Interval : If you make the time setup in event cases, the DVR doesn’t send the e-mail repeatedly during the selected duration. It is to prohibit the mass e-mail sending in frequent events. [3] Notification : E-mail sending can be selected as per the event. • Sensor : It sends the mail in sensor evnt. • Motion detection: It sends the mail in MD evnt. • Video loss : It sends the mail in video loss evnt. • Power on : It sends the mail in power on.
7 — Camera setup Camera setup It is the setup of camera usage and color. [1] Covert : It is the Covert setup. [2] AGC (Automatic Gain Control) : It setup the automatic gain control of camera to get the proper bright. [3] Static gain: It amplify the camera input signal. [4] Brightness: Bright control [5] Contrast: Contrast control [6] Saturation: Black/White control. Camera Title The camera title can be input by the virtual keyboard.
If you click the channel, virtual keyboard show up. PTZ setup It is for PTZ camera setup. • Model : Select the PTZ model. • ID : Select the PTZ ID. (Refer to the PTZ manual) Advanced (Detailed PTZ setup) It is for the PTZ speed control setup.
Serial Port Select the PTZ communication port( RS-232 or RS-485) Revers Control ▷ PAN : Select the reverse movement of PAN (right and left). ▷ TILT : Select the reverse movement of TILT (up and down). Speed ▷ ▷ ▷ ▷ ▷ Pan Speed : Speed control of right and left Tilt Speed: Speed control of up and down Zoom Speed : Speed control of Zoom Focus Speed : Speed control of focus IRIS: Iris control Changed ID ▷ In some PTZ camera, you may not changed the ID manually.
[1] Select Channel. [2] Select the PTZ preset as per the number and select the speed to move. [3] Select the moving speed. [3] Maintain : Select the time to hold the camera movement after camera moved to this location. If you call the touring after above setup, the PTZ moves to the saved position by sequence. How to use PTZ How to call the PTZ menu. The PTZ camera should be installed and selected from DVR.
(2) Menu call by mouse : Select the PTZ camera installed channel and click the right button of mouse and click the PTZ icon as follows then, it will show “+” (3) Menu call from remote controller : Select the PTZ camera installed channel and press ‘PTZ’ from remote controller then, it will show “+”.
( PTZ control screen ) How to operate PTZ (1) Operating in front. • The camera can be moved by direction key. • Every time when you press enter, the modes are changing(pan, tilt, zoom, focus) then use the right and left key for moving. - P/T : Camera moving. - Z : Camera zoom-in/out - F : Focus control. (2) Operating by mouse • When you use mouse, drag the mouse from inside to outside. If the mouse is moving far away from center, the speed become faster.
(3) Operating by remote controller • The camera can be moved by direction key. • By pressing the ‘enter’ key, the menu changes then, select right/left. - P/T : Camera moving. - Z : Camera zoom-in/out - F : Focus control. PAN/TILT ADVANCED MENU Once you call the PTZ menu, if you click it once again, the advanced setup menu shows. (1) In front button or in remote controller, if you want to change the pop-up location of advanced menu, move to right/left( If you use mouse, you can drag it.
(3 It is for PTZ maximize or minimize. (4 It is for Camera focus. (5) It is for Auto-focus. (6). If you enter the preset number and press ‘enter’, the camera will move to selected preset No. (7) It supports touring as per the preset numbers saved (12) It is for calling the OSD menu from PTZ itself. Serial port setup It is the serial port setup for the external device.
[1] RS-485: It is for ‘External keyboard’ and ‘PTZ. Since the setup is different as per the device, please check their manual for Baud Rate / Parity / Stop Bit setup [2] RS-232: Set up the following information before use. ∙ Baud Rate / Parity / Stop Bit 8 — Display Setup OSD It setup the displaying on the screen. [1] Alpha-blending : It setup the transparence of menu. [2] Window Display : Select the OSD menu to be shown on the screen.. • All : It shows all. • Camera Title : It displays camera title.
16 Split mode(16Ch DVR) • Auto Loss Skip : It skips video loss 13 Split mode(16Ch DVR) • Auto Loss Skip : It skips video loss • 3 sec : Sequencing time selection of divided screen. • If you click the channel number, you can change the channel order.
• Auto Loss Skip : It skips video loss • 3 sec : Sequencing time selection of divided screen. • If you click the channel number, you can change the channel order. 9 Split mode(16Ch/9Ch DVR) • Auto Loss Skip : It skips video loss • 3 sec : Sequencing time selection of divided screen. • If you click the channel number, you can change the channel order.
8 Split mode(16Ch/9Ch DVR) • Auto Loss Skip : It skips video loss • 3 sec : Sequencing time selection of divided screen. • If you click the channel number, you can change the channel order. 6 Split mode(16Ch/9Ch DVR) • Auto Loss Skip : It skips video loss • 3 sec : Sequencing time selection of divided screen. • If you click the channel number, you can change the channel order.
4 Split mode(16Ch/9Ch/4Ch DVR) • Auto Loss Skip : It skips video loss • 3 sec : Sequencing time selection of divided screen. • If you click the channel number, you can change the channel order. 1Split mode(16Ch/9Ch/4Ch DVR) • Auto Loss Skip : It skips video loss • 3 sec : Sequencing time selection of divided screen. • If you click the channel number, you can change the channel order. [Notice] Sequencing duration of each channel is possible in single channel mode.
• Normal : It makes the video output as per the display resolution. • VGA : It is for LCD monitor output. • Small : Since the output resolution is different as per the LCD, CRT, check whether the screen shows well. 9 — Event Setup Sensor It shows the sensor connection and setup. It suppoerts 4 sensor input. * The related camera can be different as per the model(4/9/16Ch).
[1] Sensor Input : Select the sensor usage. (sensor use) (Sensor not use) [2] Input Type: Select the sensor input type. N/Open (NORMAL OPEN) : The contact is normally opened but closed when the signal is generated. N/Close (NORMAL CLOSE) : The contact is normally closed but opend when the signal is generated. [3] Related camera: Select the camera to be related with sensor. Multi-selection is possible.
( Motion detection) (Sensor detection) (Video Loss) The output time continuous as as per the event selected on each channel. Motion Detection It is the motion detection setup menu. If there is the movement, it makes an event record as per the area and sensitivity setup.
[1] CH : Motion detection ON/OFF selection. [2] Sensitivity : Sensitivity setup. Before your actual record appliying, please test the response as per the different sensitivity. [3] Detection Area The cursor moving by the direction key and if press “enter”, this block is designated for motion detection. * MD selected area : Blue out-line * MD non-selected area : transparent * If the movement is detected, the color of that area turns red.
INTERNAL BUZZER ( Motion detection) (Sensor detection) (Video Loss) The output time continuous as as per the event selected on each channel. ItSPOT is spotOUT out setup. It can be monitored by the separate monitor such as one channel displaying, sequencing, event pop-up etc.
• ▷Mode : Select the output mode. Auto Loss Skip : If there is no video input, it skips from sequencing. • Spot Mode : It works when the selected event is happened. - Event : It pop-up the event channel. - Sequaence : It sequences for all channel as per the designated duration. - Event + Sequaence : The channel is sequencing in normal time but, if the - Channel fix: It shows selected channel all the time. ▷ Display time : It is setup for the dwell time during sequencing.
[4] AUTO : Audio output is automatic in selected channel. [5] OFF : Audio listening OFF 10 — Search Search It supports the various way of search mode such as Calendar, Date/Time, Event, etc. [1] How to call menu : Select the “SEARCH” button from the front, remote controller, mouse menu. [2] Search mode selection (1) Calendar search: Search by calendar. (2) Event search: Search by event. (3) Date /Time search: Search by specific Date/Time.
(4) Go to first : It searches the first recorded data on HDD. (5) Go to last : It searches the last recorded data on HDD. Calendar serach It searches by the calendar. [1] Disk : Select the HDD to search. [2] If the DVR read the recorded data, it shows it as calendar. Then, select the date. [3] Select the time. [4] Select the minutes then, it starts playback. Date/Time search If you know the specific date/ Time, input the time to search.
[1] Camera : Select the channel to search. [2] Disk : Select the HDD to search. [3] Date/Time : input the date/time to search. Event search It searches event recorded data. ( The channel display is different as per the 16Ch/9Ch/4Ch DVR) [1] [2] [3] [4] [5] Camera : Select the channel to search. Date/Time : input the date/time to search. Event : Select the event type to search. Disk : Select the HDD to search. Click the ‘Search’ button If you select the event list, it starts to playback.
[1] Playback or Pause [2] Reverse playback and its speed control ( Only “I” frame is playback in reverse playback ) [3] Speed control of playback [4] Stop button( It stops the current function and move to the upper menu) [Mouse using] [1] It searches 5 minutes back.
[1] Select the HDD to back-up either Main or Mirror. [2] Select the camera to back-up. [3] If you select the date to backup from calendar, it shows whether there is the recorded data on selected date. [4] Select the Hour and Minute to search.
[5] Click the ‘Start’ button once you select the backup time and click ‘end’ time for backup ending.Then, click ‘NEXT’ button. . [6] Select the backup device and option. • Device selection : Select the backup device. - USB : It is for backup to USB stick. - CD / DVD-RW : • Backup Range : It shows the start and end time of selected image. • Include selection : Including the selected option.
- Backup Viewer : It backup with the backup viewer. - Audio : It backup with audio information. • Backup Size - Device : It shows the available space of the backup device. - DATA : It shows the data size of the selected image.
11 — Appendix 4ch 9ch Operating System Embedded Linux Compression H.264 Audio compression G723.1 Video standard NTSC / PAL Input Video In/Out 4Ch 9Ch Loop Out (4/9/16 ), Composite (1), Spot(1), S-VHS(1) VGA(1) Resolution Max.
External Keyboard Multi-Language Etc. PTZ control by virtual joystick(operated by mouse) Backup Viewer auto copy & AVI export Power Adaptor 12V 5A Operating Temp. 0℃ ~ 40℃ Dimension 430 mm(W) X 54mm(H) X 315mm(D) Weight 3.
