10Base2/-T/-FL Ethernet Transceivers Specification Sheet

Specifications :
10Base2/-T/-FL Ethernet Transceivers
The KTI Ethernet transceiver family is a IEEE 802.3 compliant Ethernet transceiver series that
provides a complete interface of the AUI port to a thin Ethernet cable, a UTP cable and a Fiber
Optic cable connections.
A complete set of LEDs indicates the diagnostic status between your Ethernet devices and cabling
systems. The compact design makes it flexible to use in a variety of networking devices. KT-10F
supports full/half duplex mode that can be operated between switches, routers, and servers in full-
duplex transmission.
Key Features :

Comply with IEEE 802.3 standard

Support network traffic at a rate of 10Mbit/sec

Support Ethernet configuration using CSMA/CD access method based on IEEE 802.3 standard

Compact design
KT-10B, KT-10F, KT-10T
FCC Part 15
'
Class A
CISPR 22 Class A
Katron Technologies Inc.
15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-chih,
Taipei Hsien, Taiwan.
Te l :886-2-2698-3878
Fax:[phone]
E-mail:[e-mail]
URL:http://www.ktinet.com.tw
KTI Networks Inc.
7400 Harwin Dr., Suite 120 Houston,
Texas 77036 U.S.A.
Te l :713-266-3891
Fax:[phone]
E-mail:[e-mail]
URL:http://ww
w.ktinet.com
Trademarks: All brand names are trademarks or registered
trademarks of their respective holders.
This information is subject to change without prior notice.
Product Highlights :
KT-10B:
10Base2 Ethernet Transceiver
KT-10T:
10Base-T Ethernet Transceiver
KT-10F:
10Base-FL Ethernet Transceiver
(Complies with EMI Class B)
KT-10F supports full/half
duplex transmission via its
duplex type selector.
Model KT-10B KT-10T KT-10F
Standard IEEE 802.3 10Base2, IEEE 802.3 10Base-T, IEEE 802.3 10Base-FL,
IEEE 802.3 10Base5 IEEE 802.3 10Base5 IEEE 802.3 10Base5
Connector BNC female connector, Shielded RJ-45, Multimode ST connector,
AUI DB-15 male connector AUI DB-15 male connector AUI DB-15 male connector
LEDs Power Power, transmit, receive, Transmit, receive, link
collision, polarity reverse and collision
and link
Special Selectable terminator, Selectable link test, Full/half duplex switch,
Features selectable SQE test selectable SQE test selectable SQE test
Duplex type Half Half Full/half selectable
Environment Operation Temperature: 0
O
C ~ 40
O
C
Relative Humidity: 10% ~ 90% non-condensing
Dimensions 42 x 65 x 20 mm
Power +12VDC, 250mA max.
080110