Instruction manual
-28-
4. Console and Telnet Operation
Functions supported:
• Set and display IP parameters for the system.
• Set and display SNMP parameters for the SNMP agent function.
• Monitor system power status, power temperature status, system
fan status and other system information.
• Monitor installation status of each slots.
• Monitor the configuration and link status of each MC installed.
• Restore default settings for the system
• Change administrator password for access control.
• Update system software.
• Reboot (warm start) the system remotely.
Management Objects Modify Monitor
Password for access control Y -
System : CPU, memory, flash, software version - Y
Power 1&2 status - Y
System fan status - Y
IP address of the system Y Y
Subnet mask of the system Y Y
Default gateway IP address Y Y
SNMP name Y Y
SNMP location Y Y
SNMP contact Y Y
SNMP community name (up to 4) Y Y
SNMP community access right (up to 4) Y Y
SNMP trap host IP address (up to 3) Y Y
Slot status : module installed or not - Y
MC status : media type, speed, duplex - Y
MC link status of two ports - Y
Remote MC TP link status * - Y