Instruction manual

-31-
When login successfully, a Setup menu is shown as follows:
---------------------------------------------
Setup Menu
TCP/IP stack for KC-1300 V1.xx
[0] Print this menu
[1] IP Menu
[2] SNMP Menu
[3] View System status
[4] View Converter Slots Status
[5] Restore Default Value
[6] Security Manager
[7] Update Firmware
[8] Reboot System
[9] Exit
Please Select (0-9 )....
Enter Esc to abort....
INET>
---------------------------------------------
After prompt, type a number followed by [Enter] key for selecting an
operation item to perform. See example below:
INET> n <Enter>
Select [0] to display main menu again. [Esc] key can be used to abort the
operation of any item and back to main menu.
The following sections describe the detailed operation of each item.