User`s manual

81
tion is simply to let you enable or disable GVRP function. You
down the list and click the <Downward> arrow key to choose
Join
o declare the Join Time in unit of centisecond. Valid time range:
0 centisecond, Default: 20 centisecond.
Leav
declare the Leave Time in unit of centisecond. Valid time range:
centisecond, Default: 60 centisecond.
Leav
d for announcement that all registered device is going to be
d. If someone still issues a new join, then a registration will
Defa
ns the type of participant. There are two modes,
-participant, provided for the user’s choice.
It is Normal Participant. In this mode, the switch participates
normally in GARP protocol exchanges. The default setting is
Non-Part
-Participant. In this mode, the switch does not send or
GARP messages. It just listens messages and
Default Registr
ns the type of Registrar. There are three types of
trar administrative control value, normal registrar,
It is Normal Registration. The Registrar responds normally to
incoming GARP messages. The default setting is Normal.
Fixed:
It is Registration Fixed. The Registrar ignores all GARP
messages, and all members remain in the registered (IN)
Forbidde
Registration Forbidden. The Registrar ignores all GARP
ssages, and all members remain in the unregistered
Restricted Mod
GVRP State:
This func
can pull
“Enable” or “Disable”. Then, click the <Apply> button, the system will
take effect immediately.
Time:
Used t
20 –10
e Time:
Used to
60 –300
e All Time:
A time perio
de-registere
be kept in the switch. Valid range: 1000-5000 unit time, Default: 1000
unit time.
ult Applicant Mode:
The mode here mea
normal participant and non
Normal:
Normal.
icipant:
It is Non
reply any
reacts for the received GVRP BPDU.
ar Mode:
The mode here mea
parameters for regis
fixed registrar and forbidden registrar, provided for the user’s choice.
Normal:
state.
n:
It is
me
(EMPTY) state.
e: