User`s manual

4. Port (Port management)
Available Commands:
Port Configuration [<port_list>]
Port Mode [<port_list>] [10hdx|10fdx|100hdx|100fdx|1000fdx|auto]
Port Flow Control [<port_list>] [enable|disable]
Port State [<port_list>] [enable|disable]
Port MaxFrame [<port_list>] [<max_frame>]
Port Power [<port_list>] [enable|disable|actiphy|dynamic]
Port Excessive [<port_list>] [discard|restart]
Port Statistics [<port_list>] [<command>]
4.1 Configuration
Port> Configuration help
Description:
Show port configuration.
Syntax:
Port Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
4.2 Mode
Port> Mode help
Description:
Set or show the port speed and duplex mode.
Syntax:
Port Mode [<port_list>] [10hdx|10fdx|100hdx|100fdx|1000fdx|auto]
Parameters:
<port_list> : Port list or 'all', default: All ports
10hdx : 10 Mbps, half duplex (Not support for fiber port)
10fdx : 10 Mbps, full duplex (Not support for fiber port)
100hdx : 100 Mbps, half duplex (Not support for fiber port)
100fdx : 100 Mbps, full duplex
-18-