Installation guide

-23-
3.2.8 Quality of Service Configuration
Function description:
Default Class Some packets which did not belong to the selected QoS classifica-
tion method would be classified as Default Class.
[VLAN Tag Priority] In VLAN-tagged packet, there are 3 bits belonging to priority.
According to these 3 bits, we could arrange 8 traffics -0 0 0, 0 0 1, 0
1 0, 0 1 0, 1 0 0, 1 0 1, 1 1 0, 1 1 1. We can set High priority or Low
priority for each traffic class.
[IP ToS Classification] In a received IP packet, TOS field is used to classify the priority
class to which the packet belongs.
[
IP TCP/UDP Port Classification] In a received TCP or UDP packet, the software Port number
associated with the packet is checked and classified for the priority
class. Eight Port numbers can be configured. This option also
supports simple L4 configuration for some popular applications.
[IP Deffserv Classification] In a received IP packet, DiffServ field is used to classify the priority
class to which the packet belongs.
Click one of the QoS classification methods for the switch and click <Apply> to confirm the selection.
Then, click [Configure] for further detailed configuration for the selected classification method.