THIS PRODUCT HAS BEEN DESIGNED, MANUFACTURED AND INSPECTED IN COMPLIANCE WITH THE ISO9001 QUALITY ASSURANCE SYSTEM. Part No.
MOBILE APPLICATIONS MODEL: LVMD-102/LVMD-102S 10.2” LCD INTEGRATED DVD MONITOR RECEIVER SYSTEM INSTALLATION INFORMATION & OPERATING INSTRUCTIONS THIS PRODUCT IS INTENDED FOR PROFESSIONAL INSTALLATION ONLY FOR MOBILE-SPECIFIC 12 VOLT DC-ONLY OPERATION PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT IMPORTANT NOTE : WHEN USED IN A VEHICLE, THIS SYSTEM IS INTENDED PRIMARILY AS A MONITOR FOR THE BUILT-IN DVD PLAYER OR FOR AN EXTERNAL DVD PLAYER, VIDEOCASSETTE PLAYER, VIDEO GAME, OR CAMERA.
CAUTIONS CAUTION : ANY CHANGES OR MODIFICATIONS IN THE CONSTRUCTION OF THIS DEVICE WHICH ARE NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. WARNINGS : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET. DANGEROUS HIGH VOLTAGE IS PRESENT. SERVICING SHOULD ONLY BE PERFORMED BY QUALIFIED PERSONNEL. THIS LCD VIDEO SYSTEM SHOULD ONLY BE OPERATED WITH 12V DC.
IMPORTANT SAFEGUARDS 1. 2. 3. 4. 5. Read Instructions All safety & operating instructions should be read before operating the appliance. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings Adhere to ALL warnings on the product and in the operating instructions. Follow Instructions All operating and use instructions should be followed. Cleaning Unplug this product from power cable connector before cleaning.
TABLE OF CONTENTS We urge you to carefully read all of the descriptions and operating procedures contained in this Owner's Manual before operating your new LVMD-102/LVMD-102S.
FEATURES 10.
ACCESSORIES Please check to make sure that all of these items have been included: 12V DC Power Extension cable R-Link Cable Owner's Manual Remote Control Mounting Plate Warranty Card Batteries (AAA x 2) Screw (M4x30) x 2 Other general and vehicle- specific mounting and installation accessories are also available.
IDENTIFICATION OF LVMD-102/LVMD-102S CONTROLS & CONNECTORS 4 3 2 7 8 9 20 1 5 6 10 19 12 11 13 14 7 15 16 17 18
IDENTIFICATION OF LVMD-102/LVMD-102S CONTROLS & CONNECTORS 1. DC INPUT JACK 9. For connection to a source of 12 Volt DC power. 2. REMOTE CONTROL SENSOR Receives control signals from the remote control hand unit. Also passes controls signals to an external KTV Mobile Applications Videocassette Player or DVD Player that is connected via an RLink cable. EXTERNAL SPEAKERS OUTPUT CONNECTOR Supplies 2.0 W/Channel @ 4Ω (variable) for connection of optional external speakers. (L+, R+, Common Ground). 10.
REMOTE CONTROL USE 1. TV/VIDEO BUTTON Press repeatedly to cycle program source selection between TV, VIDEO, S-VIDEO, YCbCr(Component Video) & PC. This button is duplicated on the TV's Control Panel. 1 10 2. DIRECT CHANNEL SELECTION (0 ~ 9 & 100) BUTTONS Used for the direct selection of broadcast channels. 3. VOLUME - /+ BUTTONS These 2 buttons are primarily used in conjunction with the TV MENU & PICTURE buttons.
REMOTE CONTROL USE 15. CCD BUTTON Press repeated to cycle between Closed Captions 1, Closed Captions 2, Text 1, Text 2 and Off. 16. SLEEP BUTTON Sets the TV to automatically power off in 15-90 minutes. 17. MODE TV/DVD/VCP BUTTONS Press the GREEN MAIN DVD MODE button to control the TV(CH /CH , MTS,A/D). Press the YELLOW EXTERNAL DVD MODE button to control an EXTERNAL DVD Player. Press the BLUE EXTERNAL VCP MODE button to control an EXTERNAL Videocassette Player.
REMOTE CONTROL USE 30 30 Remote control sensor NOTES : The Remote control should be directed at the Remote Control sensor just below the LCD Screen as shown above. The maximum operating distance of the Remote Control is about 10 feet. The Remote Control should be kept away from UV exposure which may disrupt its operation. It may be difficult to receive Remote Control signals when UV is present. If this occurs, it will be necessary to operate it closer to the Remote Control Sensor.
SIGNAL CONNECTION 12V DC INPUT External Speaker (4 ohms x 2) FM TRANSMITTER ANTENNA 75-ohm Coaxial Cable AV-OUTPUT POWER OUTPUT VHF/UHF ANTENNA R-LINK AV-1 INPUT DOME LIGHTS POWER CONNECTION WIRES AV2 INPUTS GAME, CAMERA DVD,ETC. Be sure to disconnect POWER before making any connections. This illustration shows only one possible example of external equipment connection.
SIGNAL CONNECTION (continued) SELECTING THE PROGRAM SOURCE Press the TV/VIDEO button on the Remote Control or LVMD-102/LVMD-102S Control Panel to select the desired program source. Repeatedly pressing the button will switch between inputs as follows: Broadcast TV (built-in) DVD VIDEO 1 VIDEO 2 Broadcast TV ...... AUDIO SYSTEM The Audio Outputs always feed a low-level audio signal from the selected input.
POWER CONNECTION CONNECTING TO VEHICLE POWER From Vehicle Battery: RED: DC12V BLACK: GROUND Power Extension Cable(15foot) NOTE The cable assembly used to connect the LVMD-102/LVMD-102S to the 12Volt power supply may vary depending on product packaging. MANUFACTURER : TEASUNG ELECTRIC CO.,LTD. TYPE# : AWM STYLE 1015 WARNING The DC Battery Cord is ONLY for use with this model. Do not use it to power any other product.
DOME LIGHT CONNECTION IMPORTANT NOTE - NEGATIVE & POSITIVE DOOR CIRCUITS: The 4-wire harness for the LVMD102/LVMD-102S's built-in dome lights is color-coded for use in vehicles that employ a negative door circuit. This includes GM (excepting 2003 and later full-sized SUV's), Chrysler and most imported vehicles. Most Ford Motor Company vehicles and 2003 and later GM full-sized SUV's employ a positive door circuit.
INSTALLATION FOR VEHICLE USE 1. LVMD-102/LVMD-102S INSTALLATION WARNING: UNDER NO CONDITION SHOULD THE LCD DISPLAY BE MOUNTED IN ANY POSITION WHERE A PICTURE MIGHT BE VISIBLE TO THE DRIVER. EVEN IN THOSE CASES WHERE SUCH AN INSTALLATION IS NOT PROHIBITED BY LAW, DONG SO MIGHT INCREASE THE LIKELIHOOD OF A SERIOUS ACCIDENT EXAMPLE Install the unit to metal pillars in the vehicle's roof with 4 screws.
LVMD-102/LVMD-102S OPERATION 1. INITIAL PREPARATION Insert batteries into the Remote Control unit by following the procedure described in the "REMOTE CONTROL BATTERY INSTALLATION" section in this manual. Follow the procedure described in the "MENU OPERATION" and "AUTO PROGRAM" sections that follow to automatically scan and store active television channels into memory. 2. BASIC OPERATION PROCEDURE (1) (2) 1.
TV MENU BUTTON - GENERAL INFORMATION On-Screen Display On-screen displays automatically disappear after about 5 seconds if no selection is made. The TV MENU button gives you access to a variety of TV and Monitor functions. 1. Press the TV MENU button on the Remote Control. The first time it is pressed, the following display appears on the screen. (2) (1) (2) Press the TV MENU button repeatedly to select the desired item for adjustment.
TV MENU BUTTON - OPERATIONS (1) AUTO PROGRAM This function allows automatic memorization of all active TV channels in your viewing area. Once memorized, channels can be selected with the CHANNEL / buttons on the Remote Control or on the LVMD-102/LVMD-102S's Control Panel. To activate AUTO PROGRAMMING. Press the TV/Video button as necessary to switch to TV Mode. Press the MENU Button until "AUTO PROGRAM" is selected. Press the VOLUME button.
TV MENU BUTTON - OPERATIONS (3) MTS / STEREO The LVMD-102/LVMD-102S incorporates a MTS/STEREO (Multichannel Television Sound) decoder to receive: MONOPHONIC broadcasts. STEREO broadcasts (if the station is broadcasting in Stereo). SAP (Secondary Audio Program) broadcasts. SAP material might be an audio track in an additional language, or it might be DVS information (Descriptive Video Service ) for the visually impaired. To select the MTS mode: Press the TV/Video button as necessary to switch to TV Mode.
TV MENU BUTTON - OPERATIONS (4) ZOOM : This function lets you select between wide and normal screens. Normal Wide 4 : 3 16 : 9 (5) FM BROADCAST MODE & FM FREQUENCY The LVMD-102/LVMD-102S has a built-in FM Stereo Broadcast Transmitter to allow you to listen to the audio signal from the selected program source (TV, DVD, VIDEO1, VIDEO2) through the vehicle's FM radio. Procedure 1. Press the TV MENU button as many times as necessary to select "FM MODE". 2.
TV MENU BUTTON - OPERATIONS SCAN FM 88.7MHz SPEAKER NOTES TO INSTALLER The FM Transmitter Antenna (Page 8 #7) should be installed in the direction of the vehicle's main FM Antenna. Never adjust the LA01 coil on the FM Transmitter board. It was optimally adjusted at the factory. (6) SCREEN This function lets you select one of screen modes.
PICTURE BUTTON The PICTURE button allows you to select each picture adjustment element. Press the PICTURE button on the Remote Control or on the LVMD-102/LVMD-102S Control Panel to bring up the PICTURE Menu. Press the PICTURE button repeatedly to select the item you wish to adjust. The selected item will change from WHITE to MAGENTA, indicating that it may be adjusted.
STATUS BUTTON The STATUS button on the Remote Control lets you select between a CUSTOM adjustable picture setting mode or any one of 3 factory preset picture modes. Pressing the STATUS button repeatedly changes the mode as follows: (1) CUSTOM mode (2) STANDARD mode (3) DYNAMIC mode (4) MILD mode PICTURE MODE CUSTOM STANDARD DYNAMIC MILD Select this mode to view a picture that may be adjusted to your own personal taste.
OTHER USEFUL FUNCTIONS (1) QUICK VIEW Button Press the Q. VIEW button on the Remote Control. The previously viewed channel will appear on the screen. Press Q.VIEW again to switch back to the original channel. (2) DISPLAY Button Press the DISPLAY button on the Remote Control. The Program Source (Channel # & MTS mode, DVD, VIDEO1, VIDEO2) you are viewing and the setting of the SLEEP TIMER will be displayed as shown.
DVD FUNCTION & OPERATION 26
INTRODUCTION 27
INTRODUCTION 28
DISC REQUIREMENTS/COPYRIGHT INFORMATION NOTE Before you load a disc, make sure that it is compatible with the player. The following discs cannot be used with this player: Scratched or otherwise damaged discs All 80mm discs Mini disc (MD) Laser disc (LD) CD-I, CD-ROM, DVD-ROM, DVD-RAM, CDV, CVD, CDG (audio only), Super Audio (except audio layer). The ability to play certain home recorded CD & DVD discs may be limited depending on the disc type and recording conditions.
BASIC DISC PLAYBACK Before operating Set the initial settings as desired. Turn to instructions on initial settings beginning on page 35 more details. Playback Turn Power On. Insert a disc WITH THE LABEL FACING UP. Do not use force. The LVMD102/LVMD-102S will automatically switch to DVD mode and begin to read the disc. After a short period of time (depending on the complexity of the disc), playback will begin. To stop playback, press the STOP button. To temporarily stop playback press the PAUSE button.
SEARCHING FOR A SPECIFIC SCREEN OR SONG DURING PLAYBACK You can use one of the function listed below in order to jump to a specific chapter or track during playback Scan at fact forward or fast reverse Press the FR/SR or FF/SB buttons on the remote controller. For DVD playback, pressing the button successively executes the function in the following order; 2X 4X 16X 100X For CD playback, the choices are FAST or NORMAL. To return to normal playback speed, press the PLAY button.
SETTING A CUSTOM VIEW Setting a specific DVD title or chapter 1/38 Press GOTO button on the remote controller. 4/21 Use the UP & DOWN buttons to select Chapter or Track. 0:19:00 Use the numeric keypad to enter the appropriate Chapter or Track # an then press ENTER. 1. ENG D 3/2. 1 Setting a specific frame within a chaptor of a DVD Press GOTO button on the remote controller. OFF Enter the time location of the frame using the number buttons and then press ENTER.
CHANGING THE SIZE AND ANGLE OF THE SCREEN Changing the size of the screen Press the ZOOM button. Pressing the button successively executes the function in the following order: ZOOM 400% ZOOM 1600% OFF ZOOM 400% This function is only available during DVD/VCD playback. While in ZOOM mode, you may move to different portions of the enlarged screen by pressing the ARROW buttons. Viewing from another angle 1/1 Press ANGLE button.
USING THE MENU, TITLE & SUBTITLE BUTTONS Selecting a menu listed on the disc Press MENU button. The menu contained on the disc will appear on the screen. The menu appears differently with different discs. This function does not work for a CD. To view the title menu OFF Press the TITLE button. The title menu contained in the disc will appear. The title menu appears differently with different discs. This function will not work with a CDs. To view the subtitle Press the S-TITLE button.
USING THE SETUP MENU Pressing SETUP button will show a screen with which various menus can be set. Press the SETUP button, then press ENTER to select the LANGUAGE submenu. LANGUAGE Menu Language Disc Audio Disc Subtitle Disc Menu English Original Off Original DISC Language DISC AUDIO DISC SUBTITLE DISC MENU 35 : For selecting a language Menu language. : For selecting audio speaker language. : For selecting subtitle language. : For selecting a language listed in a disc.
SETTING THE LANGUAGE Selecting a menu language contained in the disc Press SETUP button on the remote controller. LANGUAGE Menu Language Disc Audio Disc Subtitle Disc Meu English Français Espanol Magyar Deutsch Italiano Polski V VV Go to "LANGUAGE" using the SELECT, Enter button. Go to "Menu Language" using the CH buttons. , Enter Choose the desired language using the SELECT button and select it by pressing ENT. Selecting Disc Audio language Press SETUP button on the remote controller.
SETTING THE LANGUAGE Selecting Disc Subtitle language Press SETUP button on the remote controller. LANGUAGE Menu Language Disc Audio Disc Subtitle Disc Meu Off Original English Spanish German Italian Portuguese Go to "LANGUAGE" using the button. SELECT, Enter Go to "Disc Subtitle" using the CH buttons. , Enter Choose the desired language using the SELECT button and select it by pressing ENT button. NOTE If the selected language is not listed in the disc the language will not appear on the menu.
SETTING THE DISPLAY OPTIONS Press SETUP button on the remote controller. Go to "DISPLAY" using the DISPLAY Display Mode TV Output 16:9 Widescreen NTSC Go to the item using the CH SELECT, Enter button. , Enter buttons. Choose the desired setting using the SELECT button and select it by pressing ENT button. DISPLAY 4:3 Letterbox DISPLAY Display Mode TV Output 4:3 Letterbox 4:3 Panscan 16:9 Widescreen : The complete 16:9 ratio screen is visible MTS black strips on the top and bottom.
SETTING THE AUDIO Press SETUP button on the remote controller. Go to "Audio" using the AUDIO Dolby Digital Sample Freq. Digital Output Bitstream 48KHz On SELECT, Enter button. Go to the item using the CH , Enter buttons. Choose the desired setting using the SELECT button and select it by pressing ENT button.
PARENTAL LOCK SETTINGS Press SETUP button on the remote controller. Go to "Lock" using the LOCK Rating Password SELECT, Enter button. Unlock **** Go to a desired item using the CH buttons. Rating Set a password and select rating level for DVDs unsuitable for children. For more details, turn to setting rating level and password. Password Turn to setting rating level and password.
SETTING RATING LEVEL AND PASSWORD This is to prohibit the playing of specified DVDs which are unsuitable for children. Some DVD discs contain a restriction level which enables parents to remove scenes or prevent playback of discs by children. DVD players are equipped with a password designed to prevent children changing the level. Setting Rating Press SETUP button on the remote controller. LOCK Rating Password Unlock 8 (Adult) 7 6 5 4 3 2 1 (kids) Go to "Lock" using the SELECT , Enter button.
SETTING THE OTHERS Press SETUP button on the remote controller. Go to "OTHERS" using the SELECT , Enter button. OTHERS Load Default Screen Saver Select On Go to the item using the CH , Enter buttons. Choose the desired setting using the SELECT, button and select it by pressing ENT button.
RECEPTION DISTURBANCE The most common types of television interference are as follows : IGNITION NOISE: Black spots or horizontal lines may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electric drills and other electric appliances. GHOSTS : Ghosts are caused by the television signals following two paths. One is a direct path and the other is reflected from tall buildings, hills or other objects.
SPECIFICATIONS ITEM GENERAL DISPLAY SCREEN VIDEO AUDIO (ALL STEREO) SPECIFICATION 10.2 Inch TFT LCD NTSC-M Frequency Synthesizer VHF 2~13/UHF 14~69/+113 CATV UHF/VHF 75 Ohm DC 12Volt(Car Battery) 23W (DC 12V) 800H 480V 300:1 Typical 0.2775 0.2775(mm) RGB Stripe Arrangement 235mm 145.8mm 5.9mm 222mm 133.2mm Left: 60 Right 60/Top:50, Botton:60(Typical) 0 C~50 C / 32 F~122 F 400(cd/m2) 1.0 0.1 Vp-p(75 Load) 1.0 0.1 Vp-p(75 Load) 400 50mVrms(RCA Jacks) 400 50mVrms(RCA Jacks) 1.